72 inch 77 lucas oil vee
#157
Senior Member
Join Date: Aug 2007
Location: Pembroke, BERMUDA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
RE: 72 inch 77 lucas oil vee
Are you installing t-bar or something to support stuffing tube? Just wondering measurement from plug hole to inside transom and also pipe length to center of 2" band?
#158
Thread Starter
RE: 72 inch 77 lucas oil vee
Hi Damon
I supported the stuffing tube today. from trans to plug is 14 1/2. on the pipe it is 13. just like you said to set it at to start with
I supported the stuffing tube today. from trans to plug is 14 1/2. on the pipe it is 13. just like you said to set it at to start with
#160
Thread Starter
RE: 72 inch 77 lucas oil vee
Damon what pipe setting works on yours?? if I need to shorten a little to start let me know..she is done except for tubing. what do you think. Craig
#163
Senior Member
Join Date: Aug 2007
Location: Pembroke, BERMUDA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
RE: 72 inch 77 lucas oil vee
ORIGINAL: cconeill
Damon what pipe setting works on yours?? if I need to shorten a little to start let me know..she is done except for tubing. what do you think. Craig
Damon what pipe setting works on yours?? if I need to shorten a little to start let me know..she is done except for tubing. what do you think. Craig
#164
Member
Join Date: Oct 2010
Location: Cape TownCape Town, SOUTH AFRICA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: 72 inch 77 lucas oil vee
Justthree words
Beeaau ti fulllll
The people that passed up on the plug for moulding this piece of art must be pulling hair out by now
Hoping to see her running soon
very nice work from start to finish....I wanted one way back when....and still do
Enjoy your hard work
Tiekie
Beeaau ti fulllll
The people that passed up on the plug for moulding this piece of art must be pulling hair out by now
Hoping to see her running soon
very nice work from start to finish....I wanted one way back when....and still do
Enjoy your hard work
Tiekie
#166
Senior Member
Join Date: Aug 2007
Location: Pembroke, BERMUDA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
RE: 72 inch 77 lucas oil vee
Hey Craig maybe you can find someone across the pond to build the hull for you using new mold.
I vote Mart (martno1fan) as a good candidate!
I vote Mart (martno1fan) as a good candidate!
#168
Thread Starter
RE: 72 inch 77 lucas oil vee
Hi Damon. I am going to finish my flyer15 and maxvee. Now that I know what the bottom looks like, I will redo it. I will mold it myself. Something new to try.
#169
RE: 72 inch 77 lucas oil vee
I am very glad to see it getting finished, there is a lot of work as you can see its month 8 now of just this year and the boat is just getting done, still would not be able to use it as a good plug, and with Mhz making one. For me it just was not worth itin the time frame that was wanted.even if 10 guys prepaid up front that might pay you a buck an hour for the work put in.Not to mention the out of pocket expense, believe me if building models was a good business there would be more guys doing it.If its what you do to get away from work then the time in does not matter.why dont you guys that want one make offers on the one that there and you will see what a bad business boat building is, one thing is for certain, nothing that happens in it will have me pulling out my hair.
#171
RE: 72 inch 77 lucas oil vee
Hey dont get me wrong I do not mean anything bad by my post, But you cant laugh at what is invested in time and money if its what you do for a living, That part of things does have to be considered, it is a very nice boat, and you did a great job.I would have loved to make it but the timing just did not work out. it happens.have fun with it.
#172
Senior Member
Join Date: Aug 2007
Location: Pembroke, BERMUDA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Hi Craig.... So far things are looking good and will know in the next day or two which direction were heading. If all goes well the hull will be built but in very,very limited production. Other than my 2 hulls and your 1 i MIGHT get about 3 or 4 extra's made for production.....notice that is a BIG MIGHT!!! I will still have mold and plug just in case I need it in the future. Will keep you posted!
#174
Senior Member
Join Date: Aug 2007
Location: Pembroke, BERMUDA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
The turbine has its home already,but I will be using 2 of the hulls to race in our club so will be using gas engines. Yes it is a very unique hull and after all we are going through to try get hulls made I don't want too many around,that's IF I decide to build the extra's other than ours.
Cheers
Cheers
#175
Thread Starter
working on my big one. it will not be fast with twin 245's. 40-45 is fast enough for me. fun runner. but still the baddest boat on the pond. luv this hull. Thanks Damon. I know this took alot to make happen. but we will get there