Hpi Nitro Monster King Clutch
#1
Junior Member
Thread Starter
Join Date: Jul 2013
Location: Centerville, PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hpi Nitro Monster King Clutch
Does this sound like the clutch? Mine seems too tight because you have to give it throttle to get it started. Once you have it running its fine unless you go slow it will stall. Slipper clutch maybe? Tried to loosen that but its a pain to get to. Also it seems like its hard on the pull start (probably because the clutch is engaging)? Thanks for any help
#2
Senior Member
Join Date: Jan 2010
Location: steyning, UNITED KINGDOM
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hpi Nitro Monster King Clutch
If its got the G3.0 engine or any other variant of that it's almost certain that its the clutch spring, you're best off buying a full savage 3 shoe clutch off of eBay as it gives more bite and will make the truck much more lively.
#4
Junior Member
Thread Starter
Join Date: Jul 2013
Location: Centerville, PA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hpi Nitro Monster King Clutch
One of these work? http://www.ebay.com/itm/HPI-Savage-A...Radio_Control_