SLT Rx compatibility
07-14-2013, 01:56 PM
#1
SLT Rx compatibility
Will this receiver (linked below) work with a 12Z 2.4 transmitter?
Specifically, if I buy the FlyZone Beaver with SLT receiver, can I "bind" my 2.4 12Z without issue? I'm brand new to 2.4 systems, and a bit fuzzy on how this Tactic/AnyLink system works.
Also, is this a "park flyer" receiver of limited range?
http://www3.towerhobbies.com/cgi-bin...&I=LXZNR1&P=ML
.
Specifically, if I buy the FlyZone Beaver with SLT receiver, can I "bind" my 2.4 12Z without issue? I'm brand new to 2.4 systems, and a bit fuzzy on how this Tactic/AnyLink system works.
Also, is this a "park flyer" receiver of limited range?
http://www3.towerhobbies.com/cgi-bin...&I=LXZNR1&P=ML
.
07-14-2013, 02:00 PM
#2
My Feedback: (327)
Join Date: Jan 2002
Location: El Cajon,
CA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
RE: SLT Rx compatibility
No SLT freq's from Tactic and FASST tech from Futaba are not compatible. The receiver is advertised as full tange, however the Anylink module is advertised for < 1000 feet.
04-17-2014, 09:40 AM
#5
Junior Member
Join Date: Apr 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How about a DX8? I'm looking at getting the same Flyzone Beaver and have a spare AR6210 in a plane I'm selling, but curious to know if I should switch the receivers between the two before I sell the Cessna. If the SLT in the Beaver will bind to a Spektrum radio then I won't need to but if what I'm hearing is correct, I'll get better range out of the AR receiver anyway, so would be in my best interest to switch them out regardless.
04-18-2014, 07:28 AM
#6
My Feedback: (11)
An SLT receiver will link only to a transmitter that sends out the SLT protocol. With your Spek transmitter, you'll need to get an AnyLink2 module to work with SLT receivers.
We're closing this thread down because it no longer pertains to Futaba system.
Thank you.
We're closing this thread down because it no longer pertains to Futaba system.
Thank you.
