Ban Dai Stug IV
#4
RE: Ban Dai Stug IV
Manheader/Kenny Kong makes and sells the track set for the 1/15 Bandai.
~ Jeff
~ Jeff
#6
RE: Ban Dai Stug IV
You will have to pin the kits tracks as they are a snap together type fit and will not hold up to RC use.
I started on mine about a quarter way... What work that is! [X(]
~ Jeff
I started on mine about a quarter way... What work that is! [X(]
~ Jeff
#7
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Grande Prairie,
AB, CANADA
Posts: 8,976
Likes: 0
Received 4 Likes
on
4 Posts
RE: Ban Dai Stug IV
ORIGINAL: Panther F
You will have to pin the kits tracks as they are a snap together type fit and will not hold up to RC use.
I started on mine about a quarter way... What work that is! [X(]
~ Jeff
You will have to pin the kits tracks as they are a snap together type fit and will not hold up to RC use.
I started on mine about a quarter way... What work that is! [X(]
~ Jeff
#10
RE: Ban Dai Stug IV
I have this Suspension Set. It will work but needs bushings to fit the holes in the lower hull as the original suspension has a larger post that fits into the holes in the lower hull. I will try and post some photos to show the difference.
#11
RE: Ban Dai Stug IV
ORIGINAL: heavyaslead
You can get sprung metal suspension, tracks and sproket/Idler on Ebay.
Search ''1/15 Bandai''
You can get sprung metal suspension, tracks and sproket/Idler on Ebay.
Search ''1/15 Bandai''
Yeah... don't spend your money as they do not fit.
A couple of tankers from the group I once battled with said they are atrocious. IF installed as directed they will "lean" away from the hull.
Of course, with some (or a lot) of work you can make almost anything fit. Or work.
~ Jeff
#12
RE: Ban Dai Stug IV
That is why they need the bushings for the lower hull.
#13
RE: Ban Dai Stug IV
ORIGINAL: MAUS45
That is why they need the bushings for the lower hull.
That is why they need the bushings for the lower hull.
Oh, I see. This is what the hold up is on yours? It needs bushings?
Maybe they who manufacturers this should know then, huh.
What size bushings? Just any kind then?
~ Jeff
#14
RE: Ban Dai Stug IV
I am going to use brass tubing cut to fit the holes in the hull and the post on the suspension. [8D]
#17
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Grande Prairie,
AB, CANADA
Posts: 8,976
Likes: 0
Received 4 Likes
on
4 Posts
RE: Ban Dai Stug IV
Thanks for the help guys. This is starting to look like it is destined for the some shelf life. A couple of other things are probably going to get my attention first.