Need help with B-2 Project
#1
Junior Member
Thread Starter
My Feedback: (4)
Join Date: Feb 2003
Location: West Point,
UT
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Need help with B-2 Project
This is the first model pulled from my mold. I am going to set it up for slope soring first. This airframe is 100% scale. Any Ideas on where the CG is???? It has a 93 inch wingspan. I am trying sloap soring first to make sure she flies.
#3
RE: Need help with B-2 Project
ORIGINAL: Rodmunch
This is the first model pulled from my mold. I am going to set it up for slope soring first. This airframe is 100% scale. Any Ideas on where the CG is???? It has a 93 inch wingspan. I am trying sloap soring first to make sure she flies.
This is the first model pulled from my mold. I am going to set it up for slope soring first. This airframe is 100% scale. Any Ideas on where the CG is???? It has a 93 inch wingspan. I am trying sloap soring first to make sure she flies.
You might want to contact Bob Parks who runs the RC-Jets list. He and Ivan Munninghoff went through the process for Ivan's big B-2.
Greg
#5
Junior Member
Thread Starter
My Feedback: (4)
Join Date: Feb 2003
Location: West Point,
UT
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need help with B-2 Project
Yes on the yaw axes with a gyro, this thing will fit wren 44's, if everything works out should be pretty cool.
thanx everyone for the replies.
Just want to make sure she flies before I invest to much.
thanx everyone for the replies.
Just want to make sure she flies before I invest to much.
#6
My Feedback: (8)
Join Date: Dec 2001
Location: Youngstown,
OH
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need help with B-2 Project
Cool project .......... Send me your email address and I will forward some of the very helpful links ,also if you could send all the dimensions , weight and airfoils I might be able to help you out with the first initial C.G as I'm working on the process of a drawing on a bigger scale of which wingspan is about 123in.
Sonny !
Sonny !