SlideWaysTeamGC

My Feedback: (2)

i woild like to get help on my stampede i just traded a nitro engine for a rtr stampede from a friend so im starting my crawler pede and would like to know shassis and componits and can i use two 55 t lathe motors on a traxxas xl esc and im thinking of using a clod chassis and 4 link bars because all the chassis hast to hold the reciver and maby the batt and esc so what do you think pics of the truck but i dont want a jeep i want a ford bronco body

RC RAC3R

that thing already looks pretty good and capable.. what kind of mods do you want to do?

2 lathe motors on the XL esc... i have no clue... lol

SirAIGman

My Feedback: (2)

thats not going to work, you are going to ned to get a super rooster and with the stock pede gearcases, you wont have a chance at mounting 2 motors..too bad a 2wd crawler wont get you very far up but real crawlers will.

SlideWaysTeamGC

My Feedback: (2)

um you should look at the pics better its made out of two stampede rearends and thats not my truck i want to build one like it an wonders what chassis to use and i will never go back to a novak esc after what thay did to my evader st and realy want know about the esc

SlideWaysTeamGC

My Feedback: (2)

and the truck im getting is stock and im getting a roller kit on ebay that comes with two tranny so if i screw one up i still have anether and what would i need to copie that truck it just looks like he used a clod chassis and 4 links and put a plate under the arms to make it solid axle i might just run two 55 t lathe motors in series would that work or do i have to put them in parrilel i dont get that can someone help me

Rc Fanatics

Sorry for answering this late. i was currently out off this hobby.
it was really fun building my Pede Crawler 4wd and 4ws.
Everything is custom made from the chassis, servo mounts and to the links.
i did'nt make a plan for this project.
i built this as i go on until it performs like a regular crawler. hehe.
just read my post it will direct you.

http://www.rcuniverse.com/forum/m_2697522/tm.htm

if you have 2 stampede gearbox your already halfway.

good luck

SlideWaysTeamGC

My Feedback: (2)

i do but dont want to make my own chassis and links can i use a clod chassis instead

Rc Fanatics

dont know bout clod chassis. but i used two rear shock tower graphite.

SlideWaysTeamGC

My Feedback: (2)

well by the looks of yours i can just use a clod chassis and links i mean it only holds a batt and esc an reciver right just like a clod look at the chassis in the first pics thats the one my friend made and he is selling them on ebay dirt cheap

race4fn

My Feedback: (15)

you shouldnt have any probs with two 55t lathe motors on xl esc it should be a good crawler you will have to turn the independent suspension solid just use a solid link inplace of the shocks with some time and work you can make a nice crawler

race4fn

SlideWaysTeamGC

My Feedback: (2)

thanks but going to stay stock till i get three more stampedes im starting to race at my lhs so im going to mod this one with a super rooster esc and a 15 turn motor and when i get the next two i will be doing the modes as like the thread he posted