"OFFICIAL"Redcat Racing TRUCK thread
#1051
RE: OFFICIAL Redcat Racing TRUCK thread
hey jeepers, check out the time between the posts, like 30seconds, we were typing at the same time, i'm not an idiot and wouldnt post someone elses answer on the same page especially.
#1052
RE: OFFICIAL Redcat Racing TRUCK thread
yes on wand and yes on backplates I have to confirm this but I am getting few samples in about 10 days.
I need to test before we pull the trigger on the order.
Darin
I need to test before we pull the trigger on the order.
Darin
#1053
Senior Member
Join Date: Feb 2006
Location: Linden,
CA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ive personaly have not had a problem with the pullstarter but it would be nice not to have to take the truck body off every time i start it!
Darin Thank you for always trying to improve REDCAT these are great trucks.
Darin Thank you for always trying to improve REDCAT these are great trucks.
#1054
Senior Member
Join Date: Jan 2006
Location: York,
NE
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Hey Darin...you said you were going to do some testing?....are you going to drop those off a building to make sure they are durable enough so people won't biotch about them sucking??
#1056
RE: OFFICIAL Redcat Racing TRUCK thread
hey guys i'm looking for a tiger drive for my himoto syclone .18 (3.0cc) any one know where i can find one
or maybe even one for hpi???
or maybe even one for hpi???
#1057
Banned
My Feedback: (14)
Join Date: May 2004
Location: chicago,
IL
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
guys.. just cut some holes in your bodies to get to the fuel tank.. and cut one in the front of the windshield and the rear to allow air to flow through.. To keep temps down. And so the bodie does not lift during acceleration. Very simple.
#1058
Senior Member
Join Date: Jan 2006
Location: York,
NE
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: entity
xceller8 I hope your kidding. Cause I think you are.. I think i know were your going with this due to previous posts.
xceller8 I hope your kidding. Cause I think you are.. I think i know were your going with this due to previous posts.
LOL!!!
#1059
RE: OFFICIAL Redcat Racing TRUCK thread
put a pull tie on the hole in the tank lid and put a hole in the body above the fuel tank, make sure the pull tie is long enough to stick out of the hole in the body, this way you dont have to take of the body to fuel it up. also make sure you cut out the back of the body, you will see the cutout impression on the inside of the bed of the truck, this way you can get to the pull start and put the glow ignitor on.
#1060
Banned
My Feedback: (14)
Join Date: May 2004
Location: chicago,
IL
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
yep. thats pretty much what i was saying.. and it's good for air flow.. And Please!!!!!!!!!! Darin.. get some discounts on motorsaver air filters!... I've been using them for over 4 years now and they are really good.
#1061
Member
Join Date: Mar 2006
Location: Amherst, OH
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
hey darin, send me a few of those starters. ill test them for ya
im pretty brutal..so if they can hold up with me then they gotta be top notch.
im pretty brutal..so if they can hold up with me then they gotta be top notch.
#1063
Junior Member
Join Date: Mar 2006
Location: Fargo, ND
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
darin, got my parts today, and as I expected they are the same thing. Nice to be able to order parts and have them overnighted. Yeah it cost some $ but I can order from home and have at home in 24 hours or less. Local hobby shops may have the parts or not this is nice option for someone who got there truck from Hong Kong. =)
Thanks for all the emails and web sites darin
Great support.
Thanks for all the emails and web sites darin
Great support.
#1064
Junior Member
Join Date: Mar 2006
Location: Fargo, ND
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
About those roto starts. I just ordered the backer plate and had to shave alittle off the bottom for the holes to line up and I just use one of my cordless drills and a long flat screw tip adapter. My drills are already paid for and they last way longer than the starter that they sell. Ofna backplate part #50010 works on a .21 and .27 infinity. Cost me about ten bucks total...
#1065
Senior Member
Join Date: Feb 2006
Location: Carlsbad,
CA
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: blackdogafd
hey guys i'm looking for a tiger drive for my himoto syclone .18 (3.0cc) any one know where i can find one
or maybe even one for hpi???
hey guys i'm looking for a tiger drive for my himoto syclone .18 (3.0cc) any one know where i can find one
or maybe even one for hpi???
If its not a shaft engine then search Tiger Drive s689
#1066
Join Date: May 2004
Posts: 7,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: thecool1
hey darin, you guys might want to take a look at the pull start. the one on my truck has broken about 6 times. i ordered a hpi roto start for it. so that will fix my problem. but you may want to look into putting roto starts on stock. or maybe make it an upgraded version available. that would be neat.
hey darin, you guys might want to take a look at the pull start. the one on my truck has broken about 6 times. i ordered a hpi roto start for it. so that will fix my problem. but you may want to look into putting roto starts on stock. or maybe make it an upgraded version available. that would be neat.
#1067
Join Date: May 2004
Posts: 7,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ORIGINAL: entity
yep. thats pretty much what i was saying.. and it's good for air flow.. And Please!!!!!!!!!! Darin.. get some discounts on motorsaver air filters!... I've been using them for over 4 years now and they are really good.
yep. thats pretty much what i was saying.. and it's good for air flow.. And Please!!!!!!!!!! Darin.. get some discounts on motorsaver air filters!... I've been using them for over 4 years now and they are really good.
#1068
RE: OFFICIAL Redcat Racing TRUCK thread
well kemo, why not give your suggestion instead of just putting people down???? Seems like your such an RC racer since you have sponsors like you keep saying over and over. What would you suggest for a pull start fix, what about an air filter??? Some advice from the sponsored racer would be nice!!
#1069
Join Date: May 2004
Posts: 7,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
ok, the pullstart quality has nothin to do with redcat... so peeps should stop placing the blame on him. If he could do something about it, we know he would . Toki makes the engines for "Team Infinity", which is the engine that comes stock in Redcat vehicles. Toki has been known for their huge shortcuts in engine development, and if anyone has ever had a Fantom Racing engine, you'll know what I mean... same deal there. But as far as pullstarts go, I think its time you guys ditch them and get a bump starter or something! Those P/S (pullstarters) are garbage... not saying every pullstart is, but those on TOKI designed engines are.
Now, as for air filters, OS has excellent filter elements. Measure your carb intake, widest point of the inlet to the other widest side. If its one cm, I think i know what will work out for you. If its bigger, i'll have to measure the carb opening on my STS.
Now, as for air filters, OS has excellent filter elements. Measure your carb intake, widest point of the inlet to the other widest side. If its one cm, I think i know what will work out for you. If its bigger, i'll have to measure the carb opening on my STS.
#1070
RE: OFFICIAL Redcat Racing TRUCK thread
hey how do i tell if my himoto syclone .18 engine is a shaft engine or not?
cause i wanna get the tiger drive for it. which one the tiger drive s680 or the tiger drive s689
cause i wanna get the tiger drive for it. which one the tiger drive s680 or the tiger drive s689
#1071
Join Date: May 2004
Posts: 7,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
Oh shoot, was lookin at wrong engine for the volcano... that engine is same as quality as SH... they have had huge p/s problems too. (its basically a cheaper SH engine).
Should be a standard shaft engine. Not sure about tiger drives, never used them before.
Should be a standard shaft engine. Not sure about tiger drives, never used them before.
#1072
RE: OFFICIAL Redcat Racing TRUCK thread
ok cool now how do i check just to make sure cause being a newbie all i wanna make sure....
what about the HPI drives would those work on it?
what about the HPI drives would those work on it?
#1074
Join Date: May 2004
Posts: 7,075
Likes: 0
Received 0 Likes
on
0 Posts
RE: OFFICIAL Redcat Racing TRUCK thread
This one should fit: http://www2.towerhobbies.com/cgi-bin...?&I=LXGFK6&P=7
Dynamite engines are also SH. The "VERTEX" engine is also a SH.
Dynamite engines are also SH. The "VERTEX" engine is also a SH.