Planes Plus 2.6M X-treme Composite Edge 540T?
#677
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
OK I read this entire post looking for the correct carbon landing gear to get. And I'm still confused. Is it the graphtec 33% edge gear I should get? I can't measure my gear as the plane is 100 miles away at the field. Thanks
#678
Senior Member
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
hey japan 3d,
i had the graphtec 33% aeroworks edge carbon gear on my edge. i just recently had a sort of a rough landing and the carbon has seperated rendering the gear useless. i have put the stock gear on now as i dont want to keep paying for the graphtec one.
my edge has easily done 500+ flights so it did last a long time but the first rough landing and its shagged. i am going to a 40% extra 260 next so i am not interested in paying for another carbon gear.
aerowiz.
i had the graphtec 33% aeroworks edge carbon gear on my edge. i just recently had a sort of a rough landing and the carbon has seperated rendering the gear useless. i have put the stock gear on now as i dont want to keep paying for the graphtec one.
my edge has easily done 500+ flights so it did last a long time but the first rough landing and its shagged. i am going to a 40% extra 260 next so i am not interested in paying for another carbon gear.
aerowiz.
#679
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
yup this is the same gear I used also...
Provides for significantly less prop clearance but this should not be an issue with tarmac strip and "normal" landings..
I chop the motor on mine on finals just to be certain that my investment in a carbon prop is not prematurely wasted !
Provides for significantly less prop clearance but this should not be an issue with tarmac strip and "normal" landings..
I chop the motor on mine on finals just to be certain that my investment in a carbon prop is not prematurely wasted !
#680
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Some pics that might be of interest........... getting familiar with it now and I agree with those that say it is a good combo of IMAC and 3D... better in that respect to what I expected...
#683
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
ORIGINAL: aerowiz
hey japan 3d,
i had the graphtec 33% aeroworks edge carbon gear on my edge. i just recently had a sort of a rough landing and the carbon has seperated rendering the gear useless. i have put the stock gear on now as i dont want to keep paying for the graphtec one.
my edge has easily done 500+ flights so it did last a long time but the first rough landing and its shagged. i am going to a 40% extra 260 next so i am not interested in paying for another carbon gear.
aerowiz.
hey japan 3d,
i had the graphtec 33% aeroworks edge carbon gear on my edge. i just recently had a sort of a rough landing and the carbon has seperated rendering the gear useless. i have put the stock gear on now as i dont want to keep paying for the graphtec one.
my edge has easily done 500+ flights so it did last a long time but the first rough landing and its shagged. i am going to a 40% extra 260 next so i am not interested in paying for another carbon gear.
aerowiz.
#684
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
the centre pair of bolts are quite close to the edge but its workable - when you cut the u/c in half you get about a 10 mm space between the legs inside.
#685
Member
My Feedback: (14)
Join Date: Feb 2004
Location: Ashburn, VA,
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
I need some help from you guys. I have been trying to get some parts from X-treme and can't get a resposnse. If anyone can help me get some parts for the 2.6m please help. I need a cowl and the canopy for this bird. I would like to get some extra canopies 3 if possible. and the cowl for the Fantasy black and green checkers.
Thanks to all.
Thanks to all.
#686
Join Date: Apr 2005
Location: , FRANCE
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Capiche: thanks for the pics.
As far as mine I can't work on my edge at this moment! I am very eager to maiden it! I will have some holidays at this end of July and I have planned to do nothing but my plane !
Space
As far as mine I can't work on my edge at this moment! I am very eager to maiden it! I will have some holidays at this end of July and I have planned to do nothing but my plane !
Space
#687
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
FLYEDGE
3 canopies ! How on earth do you use up 3 ?
I could get the parts for you but shipping from this side of the world wont be cheap at all ! Have you tried planes plus ?
C
3 canopies ! How on earth do you use up 3 ?
I could get the parts for you but shipping from this side of the world wont be cheap at all ! Have you tried planes plus ?
C
#688
Senior Member
Join Date: Sep 2003
Location: Melbourne, AUSTRALIA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
ORIGINAL: FLYEDGE
I need some help from you guys. I have been trying to get some parts from X-treme and can't get a resposnse. If anyone can help me get some parts for the 2.6m please help. I need a cowl and the canopy for this bird. I would like to get some extra canopies 3 if possible. and the cowl for the Fantasy black and green checkers.
Thanks to all.
I need some help from you guys. I have been trying to get some parts from X-treme and can't get a resposnse. If anyone can help me get some parts for the 2.6m please help. I need a cowl and the canopy for this bird. I would like to get some extra canopies 3 if possible. and the cowl for the Fantasy black and green checkers.
Thanks to all.
Hi Flyedge
Have you tried this guy
http://www.bvmprops.com/
#689
Member
My Feedback: (14)
Join Date: Feb 2004
Location: Ashburn, VA,
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Thanks guys. Planes plus is no help!! can't get a hold of anyone. Looks like BVM is the new distributer in the USA. So I hope I can get the parts from them. I need 3 canopies to replace one on each plane and one for spare.
#690
Senior Member
Join Date: Sep 2003
Location: Melbourne, AUSTRALIA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
[quote]ORIGINAL: FLYEDGE
Thanks guys. Planes plus is no help!! can't get a hold of anyone. Looks like BVM is the new distributer in the USA. So I hope I can get the parts from them. I need 3 canopies to replace one on each plane and one for spare.
Gidday Flyedge
I can get them for you and have them delivered direct..
I am the Agent in Australia...
Towball
Thanks guys. Planes plus is no help!! can't get a hold of anyone. Looks like BVM is the new distributer in the USA. So I hope I can get the parts from them. I need 3 canopies to replace one on each plane and one for spare.
Gidday Flyedge
I can get them for you and have them delivered direct..
I am the Agent in Australia...
Towball
#691
Join Date: Apr 2005
Location: , FRANCE
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Hello Guys!
I would like to know when the engine will break in with the nx 27*10. Which prop do you advice me to make 3d. I am thinking about a mejlik 28*10? Off course it's for the da100.
Thanks
Space
I would like to know when the engine will break in with the nx 27*10. Which prop do you advice me to make 3d. I am thinking about a mejlik 28*10? Off course it's for the da100.
Thanks
Space
#693
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
.... and by the way - certainly for this season, i am finding one jr 8511 on each aileron more than adequate......
#695
Senior Member
Join Date: Aug 2003
Location: Jersey,
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Just got this pic from my chief Lathe Man ! He made the Aluminium stand offs for the engine... pucka !
Nice Photo : Mr Frank !
Nice Photo : Mr Frank !
#696
Senior Member
Join Date: Dec 2001
Location: Baton Rouge,
LA
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
I have had no luck finding landing gear for this plane.. I don't care if its aluminum or FG...
Tryed BVM and Planesplus.
All test flights of the VPP have stopped... Any help would be great..
Thanks
Eddie Weeks
Tryed BVM and Planesplus.
All test flights of the VPP have stopped... Any help would be great..
Thanks
Eddie Weeks
#697
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
ORIGINAL: towball
Thanks for the video Swat. It looks great cant wait to get mine in the air.
Have just put the bearings in the rudder and elevator with carbon hinge pins. It removed all the slop.
Towball
Thanks for the video Swat. It looks great cant wait to get mine in the air.
Have just put the bearings in the rudder and elevator with carbon hinge pins. It removed all the slop.
Towball
What size are the bearing you placed in the hinges? Thanks in advance.
#698
My Feedback: (13)
Join Date: Dec 2001
Location: Columbus, OH,
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Have you gentlemen tried contacting Prapon direct?
X-treme Composite - THAILAND
Prapon Kulphaisal - CEO
[email protected]
+66(0)2518-2067 Phone
He is very good man to deal with. I have know him for years.
Kitman
X-treme Composite - THAILAND
Prapon Kulphaisal - CEO
[email protected]
+66(0)2518-2067 Phone
He is very good man to deal with. I have know him for years.
Kitman
#699
Senior Member
Join Date: Sep 2003
Location: Melbourne, AUSTRALIA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
Hi Japan3D
The bearings are 3 mm ID & 5mm OD. Flanged bearings.. Then run 3mm Carbon rods as the hinge pins...
Towball
The bearings are 3 mm ID & 5mm OD. Flanged bearings.. Then run 3mm Carbon rods as the hinge pins...
Towball
#700
Join Date: Apr 2005
Location: , FRANCE
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
RE: Planes Plus 2.6M X-treme Composite Edge 540T?
ORIGINAL: Capiche
Then some pics of my floating motion transfer arms for buddying up two servos on the rudder easily and safely without any worry of imperfection in the parity of servo movement...
Then some pics of my floating motion transfer arms for buddying up two servos on the rudder easily and safely without any worry of imperfection in the parity of servo movement...
Thanks
Space