R35_tunerVision

I don't know what this does but there is no weight difference. I guess we were just bored and wanted to do something custom and cool looking.[8D]

rc10b4_racer

u do know can buy gpm towers

R35_tunerVision

I know that but I don't want to. I cut off on the alloy purchase. The shock towers are useless. I did this because I just needed the mounts I made so in the future I could by carbon fiber plate which is not that expensive and cut out a carbon fiber shock tower.

R35_tunerVision

Hey Cheech4 will you make it for a meet this Friday or Saturday at best buy.

rc10b4_racer

i think he will

Checkpointracer

rc10b4 racer didn't you say you were going to get the new tc5 when it comes out? Well when you going to get it?

paperclip

that would be dope if you got that tc5. Do I hear mm5700 on 3s lipo's?

rc10b4_racer

ima get it in june. vortex 3.5 powered [8D]

paperclip

that will be really cool especially all that carbon fiber[8D]. u sure that you don't want this http://www.tamiyausa.com/product/ite...duct-id=58320?

Checkpointracer

Tamiya does make prety cool touring cars. Imagen a trf415 with a 9t checkpoint.[8D][8D]

rc10b4_racer

the tamiya is only known for having the smoothest shocks because they use silicone o-rings and the tc5 will use that to so i know it will be as good if not better than a trf plus if tc4s can bet em i duobt a tc5 will loose to one

ElectricGuy007

I dont want a TC5 because its belt driven #1 and #2 its gonna be pricy because all that graphite and aluminum upgrades it comes with....I just hope the TC4 doesn't get discontinued because it hasn't been out that long...[:@]

paperclip

I personally think that belt is better when it comes to touring cars, Have you guy seen the trf415 marc rheinhard edition it is crazy awesome I think my friend has one and it is really nice.

rcluke

hey guys,
my rear diff is too tight to turn when i spin the wheels in the same direction,
then when i rolled it on the floor, with no pinion on the motor, it should have rolled for ages, but it rolled less than a metre,
any ideas?
thanks

paperclip

loosen your diff.

jeepson33s

tighten all the way and then 1/8th turn out. also check your transmission for smoothness. might need new bearings (probably not)

paperclip

I heard that you should just mess around with it and get it as loose as possibe without it making a grinding noise when you floor it.

rc10b4_racer

if the track is not tight the u do not need to loosen it to much

rcluke

no guys, it is nothing to do with the looseness of it,
wether it is fully tight or fully loose, it does the same thing,
when i turn the gears inside the gearbox, they are too tight and hardly turn at all,
aka when i pulled the pinion off, and pushed it along the floor , it should have rolled for more than 1metre

bb2120

Sounds like you've ripped a tooth from your idler... it happens to people that don't loosen their slippers enough...

rc10b4_racer

or u may have installed the gearbox screws to tightly

kitgas

iam new in the buggy field.i currently own a desert gator.its quite stable.i need help cos 2 weeks ago,i took it for a ride in a park with a 4200 mah batt and a half filled shock on the left.cos i am unexperienced,i made some drifts and wreck it.i broke an axle,damaged a wheel connector,cracked a wheel connector on the right wheel and rip a tire into half from its rim.What should i do?get street tires?if so where do i get them?your suggestions will be very helpful to me.

rcluke

there was no screws in it,
i'll check the gears ,
thanks guys

rc10b4_racer

i mean the scews used to hold down the gearbox

rcluke

well thanks,
i soaked the gearbox in petrol, to remove grease, and with no grease it seems better now, so i'll re-grease and try,
what grease do you all use?