Best 3D plane for 91 fourstroke???
#3
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Gdansk, POLAND
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
Plane, when i see a profile it makes me seek. Maybe they fly fine but damn, it looks like piece of my grandpa's table
Please suggest only planes with fuselage.
Please suggest only planes with fuselage.
#5
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Gdansk, POLAND
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
Thanx for your advice, but as i remember x50 flies fine with SFG's on and without them flies like s40- not the best 3D plane.
#6
Senior Member
Join Date: Dec 2005
Location: Midlothian,
VA
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
[link=http://www.rcuniverse.com/forum/m_2524947/tm.htm]Fliton Extra 330[/link] It's a great flying plane. I have a saito 91 in mine, and it's awsome.
#7
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Gdansk, POLAND
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
Yes, i think about this beauty, but theres problem with price in Europe. In USA it costs 220 $ and in Europe 220 Euro- this sucks. But speaking about Fliton- isnt the Edge 540 freestyle better?
#8
Senior Member
Join Date: Jun 2006
Location: sevierville,
TN
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
I was just going to say fliton inspire 60 is a great one too. I've flown all three 60 size flitons and they're all awesome. Inspire is the best for 3-d imho.
#9
Senior Member
Join Date: Jun 2006
Location: sevierville,
TN
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
I used to take my inspire and do a knife edge harrier into the wind! it was so cool it would just hang there in HA KE! that thing has so much rudder it's amazing.
#11
Senior Member
My Feedback: (31)
Join Date: Mar 2002
Location: Kannapolis,
NC
Posts: 7,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
kange fun 50 on a 91
$229.27
http://www.kangkeusa.com/superkraft.htm
review:
http://www.downonthedeck.com/review_kan_fun-50.htm
$229.27
http://www.kangkeusa.com/superkraft.htm
review:
http://www.downonthedeck.com/review_kan_fun-50.htm
#13
Senior Member
My Feedback: (18)
Join Date: Jan 2004
Location: Formosa, ARGENTINA
Posts: 2,370
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
I will through in another suggestion in. The Funky 40 from CA models. Its a 3D beast with a 90 4 stroke. I have a magnum 90 in mine and it is a blast. Its a fun kit that builds easy (although the manual is a little lacking). Mine has several hundred flights on it.
The Widebody or Epsilon 40 from CA models would be a good match as well.
I think the CA planes might be easier to get in Europe as well.
The Widebody or Epsilon 40 from CA models would be a good match as well.
I think the CA planes might be easier to get in Europe as well.
#14
Senior Member
Join Date: Dec 2005
Location: Midlothian,
VA
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
I bought it through [link=http://www.horizonhobby.com/Products/Default.aspx?ProdID=FLNEXT330S]Horizon[/link]. It is both nitro or electric, which ever you choose. It comes with a motor mount that should accommodate up to a saito 1.00. My saito 91 with a 14x4 or 15x4 apc prop works great with it.
[link=http://www.rcuniverse.com/product_guide/kitratings.cfm?kit_id=3153]Here[/link] are some user reviews.
[link=http://www.rcuniverse.com/product_guide/kitratings.cfm?kit_id=3153]Here[/link] are some user reviews.
#16
RE: Best 3D plane for 91 fourstroke???
ORIGINAL: stinger40
U-Can-Do. 46 or 60? Both will fly on a 91.
U-Can-Do. 46 or 60? Both will fly on a 91.
#21
My Feedback: (19)
RE: Best 3D plane for 91 fourstroke???
Mojo 60!
After you fly a Mojo 60 you willl discover that your Grandpa should have been using that flat wood to build airplanes instead of tables.
ORIGINAL: Pawel Rzedzicki
....when i see a profile.......it looks like piece of my grandpa's table
....when i see a profile.......it looks like piece of my grandpa's table
#22
Senior Member
Join Date: May 2005
Location: Grayson,
GA
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
ORIGINAL: GRANT ED
I had a UCD 46 with a .91 in it and I did not like it. I spend 95% of the time flying at less than 3/4 throttle. The climb was impressive but big deal. I would rather have slightly less climb and not carry the excess weight around. IMO the UCD is better suited to a .72 size. I ended up selling the UCD and the person that bought it said the same thing I did and ended up removing the engine and selling the airframe. Despite what most people will say, there is a such thing as overpowering. The effect is that you end up carrying excess weight from the oversized engine that ends up being used at a power setting that a smaller engine could do.
I had a UCD 46 with a .91 in it and I did not like it. I spend 95% of the time flying at less than 3/4 throttle. The climb was impressive but big deal. I would rather have slightly less climb and not carry the excess weight around. IMO the UCD is better suited to a .72 size. I ended up selling the UCD and the person that bought it said the same thing I did and ended up removing the engine and selling the airframe. Despite what most people will say, there is a such thing as overpowering. The effect is that you end up carrying excess weight from the oversized engine that ends up being used at a power setting that a smaller engine could do.
#23
My Feedback: (84)
Join Date: Oct 2003
Location: wilmington, DE
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
RE: Best 3D plane for 91 fourstroke???
Anything from OHIO MODEL PRODUCTS WILL DEFINETLY PUT A SMILE ON YOUR FACE!!!!
Just pick one for your engine.
I have the 50" bipe and the 80" edge.. both planes are AWSOME
The bipe has a Saito 1.0 and the edge is electrified with an AXI 5330f3A
Just pick one for your engine.
I have the 50" bipe and the 80" edge.. both planes are AWSOME
The bipe has a Saito 1.0 and the edge is electrified with an AXI 5330f3A