phil3842

I wanna know if any one has put a rear exit exhaust on the .18tm in there maxx and how does it go coz i wanna do it but find out if theres any problems with it

steinersamuel

The os18tm is a direct bolt in replacement in the tmaxx and revo, the stock traxxas motor is a rear exhaust desighn, so bolting in the os is a no modification proccess. When ordering your new motor, be sure to specify tmaxx or revo exhaust manifold.

J_Bone

My Feedback: (1)

Make sure you buy the OS.18TM for the MAXX. I will come with a header for the OS engine and you can use the stock pipe and coupler. The stock Maxx header will not work on the OS engines.

phil3842

i wanna know if any one has fitted this http://www.ultimatetoys.com.au/rdlog...rs-p-1013.html
on the os 18tm in a tmaxx

87warrior

the motor will work no prolbum i have one in mine but the pipe you are showing will not work stated below.

"This is the Rdlogics Twin exhaust with dual stingers (blue) for the traxxas REVO [&o] with OS motor" 61520xosb"

phil3842

how will it not work it is the same motor and all

87warrior

the revo mantifold is different from the t maxx one is the revo is turned 180degress from the t maxx causing it to be off in the other direction.