TheKennyKiller

i just put a forward only kit in my revo should i be puting some grease in the gearbox to

crazzyrevo

No No dont put grease in the tranny you will kill it.

TheKennyKiller

so it runs dry then ?

crazzyrevo

You have a pm

ttoks

i suggest lightly greasing the output shafts inside the tranny, but do not fill it with grease.

jatoracing33

white lithium grease...i use a little bit on my jato tranny but just keep it away from the OWB (im pretty sure the revo tranny has one)

TheKennyKiller

OWB i guess that means one way bearing ... where is this one way bearing you speak of

DaveG55

It usually sits on the main input shaft inside the primary gear. It allows the transmission to freewheel when you're off the throttle.
I run all my transmissions completely dry. Never had a problem.

Redrawker

Just run them dry. The Revo and T-maxx's (and Jato's... I think) tranny is completely plastic so no grease is needed. I've heard of a guy who put grease in his T-maxx's tranny and lost second gear until he stripped the whole thing down and whipped it off.