NO MORE WIRES IN THE EFFLUX
12-01-2007, 04:40 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: nizozemske, NETHERLANDS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
NO MORE WIRES IN THE EFFLUX
In a bright moment today I decided to lead the e-wires in my new HyperFlow through the stator fins. It took about 1 hour extra and I now have the cleanest DF you can imagine. Even if it does not make a difference in efficiency, it looks real cool.
I wonder if anything like this is commercially available aswell?
Anyone want pics?
I wonder if anything like this is commercially available aswell?
Anyone want pics?
12-05-2007, 04:05 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2005
Location: nizozemske, NETHERLANDS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: NO MORE WIRES IN THE EFFLUX
Ok, here's the best pic.
I stripped the wires a bit, drilled 3 little holes in the 'motor cover' and glued the stripped wires between the (optional) stator and the standard stator that's behind the fan. Do not strip the wires to the extend that you would have bare wires under the cover. I stretched the wires to get a bit of tention on the isolation and fixed it with a bit of epoxy.
I still have to measure the powers, but just by feeling the force I'm already highly impressed with the amount of airflow (compared to what I'm used to...)
I stripped the wires a bit, drilled 3 little holes in the 'motor cover' and glued the stripped wires between the (optional) stator and the standard stator that's behind the fan. Do not strip the wires to the extend that you would have bare wires under the cover. I stretched the wires to get a bit of tention on the isolation and fixed it with a bit of epoxy.
I still have to measure the powers, but just by feeling the force I'm already highly impressed with the amount of airflow (compared to what I'm used to...)
