compute42

My Feedback: (15)

Just bought a Ultrafly E Yak 54 at the LHS today, very pretty airplane, and the price was right!!!!

I'm having a tough time determining the power setup since there's not much info on them here!
[link=http://www.modelflight.com.au/ultrafly/ultrafly_yak_54.htm]ultrafly yak[/link]
Specs
Lenth 39.5"
Wingspan 47.25"
Wing area 400 sq.in
AUW 37oz

For batteries I'd like to run the new thunderpower 3s 2200 extrme's... keeps the bat costs down. cause they were saying the manual for extreme 3d use 3s2p 2100!!!!

I was thinking the Atlas 2915/10 setup with the 45AMP speed controler package from Hobby lobby, price is only 126 for both!
most likely a 12x6E APC would be a good prop I'm guessing...

the Atlas might be too much torque / low windings setting... so I'm thinking the 2nd choice would be the
AXI 2814/20 setup with a jetti 40amp esc...

The atlas stuff would be preferable cause It comes with the extra mounts etc... and is cheaper!

Any other combo's would be appricated!

compute42

My Feedback: (15)

ok lets open it up with the E-flight and extreme flight RC motor/ESC combos...