Multiplex Twin Star II + T2M Funair questions ...
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Gent, BELGIUM
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Multiplex Twin Star II + T2M Funair questions ...
Saved up alot of money the past few months and now it's time to spend it. I bought a [link=http://www.pigs-airlines.be/AMC5/T2M/FunAir40_t2m.htm]Jamara T2M Funair[/link] (sry for the french page) about a year ago but never built it. Just need a motor, ESC and battery. I'm also thinking about buying a [link=http://www.multiplexusa.com/product_fs.htm]Multiplex Twin Star II[/link] (go to: Models > Sport > Twin Star II). And to top it of, I'm also thinking of buying the Aerofly Pro Deluxe (USB) version to practice at home.
Anyway, I've got a few questions about both models:
1) I'm going for an alectric setup for my Funair (duh [8D]), but have no idea what motor, ESC and battery I need for it ... All these things will be puchased on a swiss website and I know that they sell every AXI-motor out there, so that's the brand I'm going for. But which one will I need to fly this bad boy ? How many amps does the ESC have to be and how many lipo cells for the battery ?
2) As for the Twin Star II, I'm just gonna start out with the stock motors and see how it flies. As for ESC, I chose the Jeti JES 030amp speed controller (as recommended by Hobby-lobby). My problem is that I don't know which battery to pick ... I was thinking about this one, a [link=http://shop.lindinger.at/product_info.php?cPath=1335_1349&products_id=55565]Sanyo 8-cell 3600mah Nimh pack[/link]. Will this battery fit inside the battery-tray of the Twin Star II ? Is it not to heavy ? Would a 7-cell also work ? any thoughts ?
Alot of questons from a person starting out in electric flight.
regards,
Prophex
Anyway, I've got a few questions about both models:
1) I'm going for an alectric setup for my Funair (duh [8D]), but have no idea what motor, ESC and battery I need for it ... All these things will be puchased on a swiss website and I know that they sell every AXI-motor out there, so that's the brand I'm going for. But which one will I need to fly this bad boy ? How many amps does the ESC have to be and how many lipo cells for the battery ?
2) As for the Twin Star II, I'm just gonna start out with the stock motors and see how it flies. As for ESC, I chose the Jeti JES 030amp speed controller (as recommended by Hobby-lobby). My problem is that I don't know which battery to pick ... I was thinking about this one, a [link=http://shop.lindinger.at/product_info.php?cPath=1335_1349&products_id=55565]Sanyo 8-cell 3600mah Nimh pack[/link]. Will this battery fit inside the battery-tray of the Twin Star II ? Is it not to heavy ? Would a 7-cell also work ? any thoughts ?
Alot of questons from a person starting out in electric flight.
regards,
Prophex
#2
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Gent, BELGIUM
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
RE: Multiplex Twin Star II + T2M Funair questions ...
I got a second question about the Twin Star II aswell: Hobby-Lobby suggests to use a Jeti 30 amp brushed speed controller, but the manual says that you need 30 amps MINIMUM, should I upgrade the speed controller to a Jeti 45 amp brushed one ? Or will the 30 amp one be fine ?