Big Airwolf project..
12-31-2007, 12:40 AM
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Pune, , INDIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Big Airwolf project..
Here is some of my initial CAD modelling work on the Benzin Mechanics. I don,t have the inner surface to surface distance from side frame A to side frame B (Z axis distance). Anyone please tell me the actual distance between these two side frames.
Your help would be sincerely appreciated ..[sm=wink_smile.gif]
Thanks !
regards,
Pradeep
Your help would be sincerely appreciated ..[sm=wink_smile.gif]
Thanks !
regards,
Pradeep
12-31-2007, 01:59 PM
#3
Join Date: Oct 2005
Location: Yellowknife,
NT, CANADA
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
RE: CAD model for Benzin Mechanics
Are you making your own mechanics? Make sure you guys are on the same page, as in inside distance between the two frames? Not outside or something like that 
.
.
12-31-2007, 03:21 PM
#4
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Pune, , INDIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: CAD model for Benzin Mechanics
ORIGINAL: brokenheli-1
42 mm is what I get with my calipars Kevin
or 1.663 in inches
42 mm is what I get with my calipars Kevin
or 1.663 in inches
Thank you very very much brokenheli.
I would be working on this benzin mechanics & will keep updating my CAD design on this forum.As the new year dawns may it beacon way to greater joys, new hopes new beginnings!!!
May each new day bring happiness, prosperity and continued success for you!!!
May it bring for you promises of new dreams to fulfill, new goals to reach and new joys to discover!!!
HAPPY 2008!
12-31-2007, 03:25 PM
#5
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Pune, , INDIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: CAD model for Benzin Mechanics
ORIGINAL: Lins
Are you making your own mechanics? Make sure you guys are on the same page, as in inside distance between the two frames? Not outside or something like that.
Are you making your own mechanics? Make sure you guys are on the same page, as in inside distance between the two frames? Not outside or something like that
.
As the new year dawns may it beacon way to greater joys, new hopes new beginnings!!!
May each new day bring happiness, prosperity and continued success for you!!!
May it bring for you promises of new dreams to fulfill, new goals to reach and new joys to discover!!!
HAPPY 2008!
Thank you!
01-02-2008, 01:11 PM
#9
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Pune, , INDIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: CAD model for Benzin Mechanics
ORIGINAL: Lins
Very nice! How will you manufacture it?
Very nice! How will you manufacture it?
To manufacture it, I first need to complete the whole CAD model & the analysis. Trust me with the kind of machines availabe in todays world, manufatcuring is the easiest part...
& more over I stay close to a very huge Industrial belt in my city..
03-07-2008, 12:46 PM
#17
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Pune, , INDIA
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
RE: Big Airwolf project..
Its been a long time since I have made any progress....but now I have enough time to complete this project.
I have started modelling on the rotor head.
