rustler brakes
05-04-2008, 07:10 AM
#2
Senior Member
Join Date: Dec 2007
Location: Dallas, GA
Posts: 1,025
Likes: 0
Received 0 Likes
on
0 Posts
RE: rustler brakes
ok is the trim set right.........if not there is a little cirle looking thing on your brake linkage...its right behind the little fuel line on it.
take the loosen it push it towards the servo(making the brake pads get tighter) until you are satisfied with how you much more brake you will have....beware not to push it too far forward or the brakes will always be on even when you are not using them.
take the loosen it push it towards the servo(making the brake pads get tighter) until you are satisfied with how you much more brake you will have....beware not to push it too far forward or the brakes will always be on even when you are not using them.
05-05-2008, 03:26 PM
#4
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Naperville, IL
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
RE: rustler brakes
ORIGINAL: FastestJato
thats what i told u 2 to u just didnt pushed them enough...
thats what i told u 2 to u just didnt pushed them enough...
u had no idea wat to do
05-05-2008, 09:21 PM
#6
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Naperville, IL
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
RE: rustler brakes
ORIGINAL: FastestJato
ok u pushed the screw but just not enought .....
ok u pushed the screw but just not enought .....
there is no screw
man ur really bad
dont give out advise if u dont know what ur talking about
people get mad
05-06-2008, 03:31 PM
#9
Senior Member
My Feedback: (7)
Join Date: Apr 2008
Location: South River, NJ
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
RE: rustler brakes
ORIGINAL: edsrustler
wat the hell r u talking about
there is no screw
man ur really bad
dont give out advise if u dont know what ur talking about
people get mad
ORIGINAL: FastestJato
ok u pushed the screw but just not enought .....
ok u pushed the screw but just not enought .....
there is no screw
man ur really bad
dont give out advise if u dont know what ur talking about
people get mad
