GP Old Timer ARF CG
#1
Member
Thread Starter
My Feedback: (16)
Join Date: May 2002
Location: Dushore,
PA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
GP Old Timer ARF CG
Hi Everyone,
Does anyone out there have an assembly manual for the GP Old Timer ARF? I would like to know what GP calls for the CG distance from the leading edge. I know I can plot it out and try it but I would rather know their point as a starting to to get it right. I got this plane on E-bay with no other paperwork, ($28.00) it's like brand new so a little time invested will be worth it. It's only 3 channels now but another wing is going to be happening as soon as my building area gets cleared off.
Thanks in advance, Pipercub 6
Does anyone out there have an assembly manual for the GP Old Timer ARF? I would like to know what GP calls for the CG distance from the leading edge. I know I can plot it out and try it but I would rather know their point as a starting to to get it right. I got this plane on E-bay with no other paperwork, ($28.00) it's like brand new so a little time invested will be worth it. It's only 3 channels now but another wing is going to be happening as soon as my building area gets cleared off.
Thanks in advance, Pipercub 6
#3
My Feedback: (23)
Join Date: Sep 2004
Location: Fayetteville,
GA
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
RE: GP Old Timer ARF CG
Per Great Planes website: CG location is 3 3/4"
All the specs can be found here: http://www.greatplanes.com/techsupport/technotes.html
Scroll down until you get to the Discontinued Planes section. Good luck.
All the specs can be found here: http://www.greatplanes.com/techsupport/technotes.html
Scroll down until you get to the Discontinued Planes section. Good luck.