Team Losi Crawler coming in 8 days!
#7
Senior Member
Join Date: Jan 2006
Location: grand junction, CO
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
RE: Team Losi Crawler coming in 8 days!
Here ya go, enhanced image, even wheelbase calculations!
Ok guys, I just tried calculating up the wheelbase assuming that the wheel size is 2.2". I'll show you how I did it.
In photoshop, I measured the diameter of the wheel as .677. I do not know the units, but for this calculation it does not matter anyway. I measured the wheelbase as 2.832.
Using ratios....
.677 = 2.2"
2.832 = x (wheelbase)
2.832/.672 = x/2.2"
2.2" x 2.832/.672 = x
2.2" x 4.21429 = x
9.27144" = x (wheelbase)
So, only 9.3" wheelbase is what I get. Feel free to do this on your own! This all assumes the wheel size is 2.2"
-Matt
Ok guys, I just tried calculating up the wheelbase assuming that the wheel size is 2.2". I'll show you how I did it.
In photoshop, I measured the diameter of the wheel as .677. I do not know the units, but for this calculation it does not matter anyway. I measured the wheelbase as 2.832.
Using ratios....
.677 = 2.2"
2.832 = x (wheelbase)
2.832/.672 = x/2.2"
2.2" x 2.832/.672 = x
2.2" x 4.21429 = x
9.27144" = x (wheelbase)
So, only 9.3" wheelbase is what I get. Feel free to do this on your own! This all assumes the wheel size is 2.2"
-Matt
#8
RE: Team Losi Crawler coming in 8 days!
ORIGINAL: The Real Dogman
Snaut Rocket started a thread earlier about this [link=http://www.rcuniverse.com/forum/m_7637503/tm.htm]See it here!![/link]
Snaut Rocket started a thread earlier about this [link=http://www.rcuniverse.com/forum/m_7637503/tm.htm]See it here!![/link]
Let's continue the discussion there, shall we?