Offcial xxx-t thread
#1001
Senior Member
Join Date: Feb 2007
Location: Laconia, NH
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: joe*89
right now i got about $100 to spend and that wont get a lipo and charger so could someone please let me know what the best nimh or nicd 6 cell i could get for my mm6900,i was thinkin maybe the venom 5000mah 6 cell 7.2v with deans?
right now i got about $100 to spend and that wont get a lipo and charger so could someone please let me know what the best nimh or nicd 6 cell i could get for my mm6900,i was thinkin maybe the venom 5000mah 6 cell 7.2v with deans?
The venoms arent worth it. They cant handle the amp drain.
The Ener-g4600 batteries have been becoming very popular.
#1002
Senior Member
Join Date: Feb 2007
Location: Laconia, NH
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Oracle618
Does anyone have both the xxx-t and the xxx-nt ? I need to know if the xxx-nt rear arms will fit on the xxx-t without changing the pivot block.
I know the fronts will work (they are the same part number) I also realize that the rears are different part numbers but I have seen that some people have used the xxx-nt rear arms on the xxx-t ... can someone verify this ?
Thanks,
Does anyone have both the xxx-t and the xxx-nt ? I need to know if the xxx-nt rear arms will fit on the xxx-t without changing the pivot block.
I know the fronts will work (they are the same part number) I also realize that the rears are different part numbers but I have seen that some people have used the xxx-nt rear arms on the xxx-t ... can someone verify this ?
Thanks,
I have not tried, But after looking at a pic of them on horizonhobbby I dont think they would work. The end that goes on the pivot block looks to narrow.
#1004
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
I just built my MF2 and wanted what you guys are running. I am gonna run a Mamba Max 7700 on 6 cells and want to know what gearing I should use. Right now it's 23/86 on a stock motor and I am getting about 20-25MPH.
This truck is AWESOME!!!
This truck is AWESOME!!!
#1005
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Chris_RC
I just built my MF2 and wanted what you guys are running. I am gonna run a Mamba Max 7700 on 6 cells and want to know what gearing I should use. Right now it's 23/86 on a stock motor and I am getting about 20-25MPH.
This truck is AWESOME!!!
I just built my MF2 and wanted what you guys are running. I am gonna run a Mamba Max 7700 on 6 cells and want to know what gearing I should use. Right now it's 23/86 on a stock motor and I am getting about 20-25MPH.
This truck is AWESOME!!!
#1006
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ok cool. My friend has a GP3300 7 cell matched pack and it should fly with the Mamba 7700. So what gearing would you suggest?
#1007
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Chris_RC
ok cool. My friend has a GP3300 7 cell matched pack and it should fly with the Mamba 7700. So what gearing would you suggest?
ok cool. My friend has a GP3300 7 cell matched pack and it should fly with the Mamba 7700. So what gearing would you suggest?
#1008
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
I will try that gearing. And how often do you rebuild your transmission? Because I have heard that the Losi tranies arne't that good on their trucks and when I built it I might have not put enough diff grease in the tranny. I have about 15 runs on it with a crappy motor and it goes about 20-25MPH.
#1009
Senior Member
Join Date: Feb 2007
Location: Laconia, NH
Posts: 1,157
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Chris_RC
I will try that gearing. And how often do you rebuild your transmission? Because I have heard that the Losi tranies arne't that good on their trucks and when I built it I might have not put enough diff grease in the tranny. I have about 15 runs on it with a crappy motor and it goes about 20-25MPH.
I will try that gearing. And how often do you rebuild your transmission? Because I have heard that the Losi tranies arne't that good on their trucks and when I built it I might have not put enough diff grease in the tranny. I have about 15 runs on it with a crappy motor and it goes about 20-25MPH.
It all depends on the user, I dont rebuild until something goes wrong. But if you put the tranny together rite it should last awhile. Ive had it last me almost a year b4 I had to rebuild it.
#1010
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
Well I had great luck with all my Losi trannies except the Losi XXX Buggy which it's a pain to get parts for.
But on RCTech forums there is ALOT of people with Losi's and they say that the T4 has a way better diff and the Losi one isn't that good
But on RCTech forums there is ALOT of people with Losi's and they say that the T4 has a way better diff and the Losi one isn't that good
#1011
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Chris_RC
Well I had great luck with all my Losi trannies except the Losi XXX Buggy which it's a pain to get parts for.
But on RCTech forums there is ALOT of people with Losi's and they say that the T4 has a way better diff and the Losi one isn't that good
Well I had great luck with all my Losi trannies except the Losi XXX Buggy which it's a pain to get parts for.
But on RCTech forums there is ALOT of people with Losi's and they say that the T4 has a way better diff and the Losi one isn't that good
#1013
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
I just found this website. [link=http://www.bfastrc.com/]HERE[/link] is the link to it. They make these diff balls and it is $20 to get the thrust balls, the diff balls, and the diff rings. The people on RCTech say it makes the diff super smooth. And FREE shipping!
#1014
Senior Member
Join Date: Apr 2007
Location: Kannapolis, NC
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
Hello everyone! I have been messin around in r/c for about four years now, always traxxas. But now i recently got A xxx-t rtr brushless with the 4700 novak. First off let me tell you I have had A rusty with A 3.3 on it, t-maxx with A .32 on it, and jato with the stock on it, and this car beats them all as far as being reliable, easy to fix, and just plain fun! I had to jump it off my roof to even break the dang front arm on it! Now I have A few problems that I would like to fix if anyone is willing to help....... First I just bought a 4200 venom 7 cell pack and it's alot faster now,,, but the pack is really hot when done driveing and the motor has hit the cut off several times due to heat. How do I fix this? The gear is pretty low already as it's top speed is maybe 30mph? Tops! Next I like the other guy A few pages back cant seem to stop the car without turning or pulling to one side? I know the motor does the brakeing but how would I adjust the tranny to stop straight? Next would be I have the venom pack, what kind of pack should I have tp up the speed? I have already gone from the 7.2 to the 8.4 packs. But would I benefit from A high C rateing lipo? Or would I just get longer run times? I know these are the typical questions butI have read every page and dont see anything relative to my questions. Thanks and have A great day!
#1015
Junior Member
Join Date: Dec 2005
Location: Houston,
TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
I just thought I'd give you guys the heads up that I'm selling my XXX-T MF2 with the mamba max 5700 combo ready to run. I just don't use it enough, and I need the money for college. I had it on Ebay last week, but it didn't meet the reserve. Is anyone interested? I will most likely relist it on Ebay within the next couple of days, and I'll let you guys know when I do. Here's a picture of everything that is included:
#1016
Junior Member
Join Date: Dec 2005
Location: Houston,
TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
Well, my xxx-t MF2 is now listed in the RCU marketplace. Here's the direct link: http://www.rcuniverse.com/market/item.cfm?itemId=413461 .
#1017
Senior Member
Join Date: Apr 2007
Location: Kannapolis, NC
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
Wow, I have been waiting for anyone to comment on my post and have not seen A single post of help........ I am also in the rusty forum and i help anyone who wants it as soon as possiable. Is this tread just dead? Is there no one who knows how to help me? Or just does no one use this site any more? Heres to hopeing I hear from someone..... No harm meant just figured that someone would post by now..... Thanks for any help.....
#1019
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
This thread isnt dead. just a couple of the people who have the xxx-t or any of the mf or cr models havent been on the forum lately. Like SavageX78 and Cheech4. This forum is more like for bashers and that is why no one suggests a Losi like the xxx-t. instead they suggest a rsutler vxl or something like that. RCTech.net/forum has alot more racers who have the xxx-t and I think when it comes to my xxx-t that I ask my question there because the people know more about my car. The rsutler and those basher trucks arent as popular.
#1021
Senior Member
Join Date: Nov 2005
Location: Southern California,
CA
Posts: 6,912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
ORIGINAL: Redvanmafia
I dont see alotta people around with xxx-t's anymore, could be wrong tho
I dont see alotta people around with xxx-t's anymore, could be wrong tho
#1022
Senior Member
Join Date: Mar 2008
Location: by the lake,
ON, CANADA
Posts: 2,447
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
theres still alotta smart people on here that no there stuff when it comes to racing. but there is alotta bashers here, because its fun to bash and you dont have to be good at it, you can just go out and give er fun little past time,
#1023
Senior Member
Join Date: Apr 2007
Location: Kannapolis, NC
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
Well, I stand corected!!!!!! That many post in no time at all is A nice day! I;m not as much for bashing, however I love to burn off the wheels on the street. I guess my main concern is what set up will give me A good speed without loseing all my bottom end. Do I need to go lipo? Or just up the cell count to a 8 cell? I dunno if it would fit but i would make it fit![>:] What do you guys think? Thanks by the way for all the responses.
#1025
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Offcial xxx-t thread
im here all the time, and i will answer anyone question if the knowledge is there to answer.. I also have an evader and i post there all the time cuz i know all the bells and whistles on that truck so i try to help out.. now im not saying i don't know as much with the losi but my mf2 is a dream hardly nothing goes wrong with it, maintain it and it rides like nothing else.