"air-buggy" - stage one
#1
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
"air-buggy" - stage one
This is the first version of what I call the air-buggy, it's mostly spare parts and a bit of fabricated aluminum. The machine is much faster than I had expected, and that's just running a reedy conquest motor with an 8x6 prop. I think I need a 7700kv MM and alot more asphalt for this to stretch it's legs.
#4
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
I'm not actually sure of an accurate MPH since it just sails by me, and without any brakes, I'm trying to turn without wrecking. I would guesstimate in the 30ish range though. I'm convinced that with the right brushless system, it could really get scary. It makes a great sound at full throttle. Stage two will be lighter and have far less drag, although the "flow-through" design seems to work pretty well.
#6
RE: "air-buggy" - stage one
thats the best prop powered car iv seen so far. as far as more speed, use a lipo batt. thatll give more power and less wieght. for aero, id try making a lid that covered the electronics....one that made the air flow over the chassis. make the cover fit as close to the top of the chassis tub, so it doesnt get in the way of air flowing to the prop.
you could also try mounting the prop/motor so its tilted alittle down, aiming the thrust some toward the ground.
you could also try mounting the prop/motor so its tilted alittle down, aiming the thrust some toward the ground.
#7
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Thanks!, I'll put that cover together tonight, and I'm also planning to eliminate the front shock-tower and look for narrower wheels/tires.
#9
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
I would love to shoot a video, but it's going to have to be after this never-ending rain we are having. I have the cam/batteries/willing videographer and a large empty parking lot. I just changed out the Rx and the ESC due to some range-limiting glitchificational oddities[:@], hope that fixes the problem. Also went by the LHS today and looked at Mamba Max 7700's.
#11
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Thanks!, as I write this, it's trying to get sunny and hopefully it will remain so, for the rest of the weekend. I feel stupid for not realizing why I had the glitching, it has to be the huge aluminum loop attatched to the aluminum tub-chassis. I'm going to relocate the rx to the rear between the back tires and shield it properly. With the motor, ESC, and battery all within that loop, the RF noise must be intense, it's a wonder that it worked at all before.
#12
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Mamba Max 7700kv combo ordered!, will post updated pics after install. I hope it doesn't take flight, never to be seen again.
#13
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Since the above post changes things dramatically, I have a question. What is the best deal going in 4600-5000mah 6-cell stick packs?, I'm already looking at Trinity reference packs as they seem to get good reviews. Need something that is durable yet affordable, thanks.
#14
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
After consulting with the experts on this subject, I'm going to be using a 4600kv motor instead. Should still be plenty fast and challenging to drive.
#16
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Thanks!, I have put about 20 hrs total into it at this point, including thought about design stuff. It actually handles rather well since I extended the rear wheels outward from stock, it just gracefully turns at low to medium speeds, but if you go fast and make a sudden turn, it will slide a 180 right around with no leaning or tipping. If I had used larger rear tires, it would probably try to flip, but I also have them cambered so only the inner edges are contacting the ground.
#18
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
That was my original intention, to build an "air-sled", but with the prospect of crossing a frozen lake if it flips, I decided on this. I have considered it, but I think I want something that just rips on pavement instead.
#24
Senior Member
Thread Starter
Join Date: Feb 2008
Location: Anchorage,
AK
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
Thanks, it is going to drift when cornering at speed, but it was always going to be a straight-line machine. I just need about 500 yards of straightaway to really see how fast it will go.
#25
Senior Member
My Feedback: (4)
Join Date: Feb 2005
Location: Ellensburg, WA
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
RE: "air-buggy" - stage one
ORIGINAL: alaskadf300
Thanks, it is going to drift when cornering at speed, but it was always going to be a straight-line machine. I just need about 500 yards of straightaway to really see how fast it will go.
Thanks, it is going to drift when cornering at speed, but it was always going to be a straight-line machine. I just need about 500 yards of straightaway to really see how fast it will go.