T-Maxx 4908 Aluminum Upgrades
#1
Member
Thread Starter
T-Maxx 4908 Aluminum Upgrades
Here are a few extra upgrades that I’m going to buy. My question is this, what manufacture do you recommend for the below parts?
Bulkheads – Silver – Front and Rear (do I need braces as well)
RD Logics
Integy
Other
Shock Towers – Blue – Front and Rear
RD Logics
Integy
Other
Aluminum Body Mounts - Silver Front and Rear
RD Logics
Integy
Other
Lunsford Racing Titanium Hinge Pin Kit
Thanks
JAM
Bulkheads – Silver – Front and Rear (do I need braces as well)
RD Logics
Integy
Other
Shock Towers – Blue – Front and Rear
RD Logics
Integy
Other
Aluminum Body Mounts - Silver Front and Rear
RD Logics
Integy
Other
Lunsford Racing Titanium Hinge Pin Kit
Thanks
JAM
#3
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
ORIGINAL: StemTMAXX
one company for everything. American CNC Machining, except the titanium hinge pins, ACNCM doesn't have titanium.
one company for everything. American CNC Machining, except the titanium hinge pins, ACNCM doesn't have titanium.
#4
Senior Member
RE: T-Maxx 4908 Aluminum Upgrades
the link I had was www.acncm.com but for some reason its not working. try it.
#7
Senior Member
Join Date: Mar 2006
Location: Brantford,
ON, CANADA
Posts: 2,541
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
ORIGINAL: JAMBF750
Here are a few extra upgrades that I’m going to buy. My question is this, what manufacture do you recommend for the below parts?
Bulkheads – Silver – Front and Rear (do I need braces as well)
RD Logics
Integy
Other
Shock Towers – Blue – Front and Rear
RD Logics
Integy
Other
Aluminum Body Mounts - Silver Front and Rear
RD Logics
Integy
Other
Lunsford Racing Titanium Hinge Pin Kit
Thanks
JAM
Here are a few extra upgrades that I’m going to buy. My question is this, what manufacture do you recommend for the below parts?
Bulkheads – Silver – Front and Rear (do I need braces as well)
RD Logics
Integy
Other
Shock Towers – Blue – Front and Rear
RD Logics
Integy
Other
Aluminum Body Mounts - Silver Front and Rear
RD Logics
Integy
Other
Lunsford Racing Titanium Hinge Pin Kit
Thanks
JAM
Take a look at RPM for the rest of what is listed except the hinge pins they make it all.
#9
Senior Member
Join Date: Sep 2007
Location: dale city, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
i would say go with rpm too.. i bought the a-arms for my revo and you can tell just by looking and holding them that they are better. plus all/most rpm parts is guarented not to break or they will replace it for free.. cant beat that deal...jake
#11
Senior Member
Join Date: Sep 2007
Location: dale city, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
jamb,
here is a couple links that may help.. from what i saw the acncm are great but they are too strong and end up causing other things to break. plus i read they strip out very easy. in these links they mention a couple other ones that sound good. hope you find some good info in one of these links.. jake
[link]http://www.rcbros.com/forum/forum_posts.asp?TID=1411&PN=1&TPN=1[/link]
[link]http://www.unlimitedengineering.com/forum/archive/index.php/t-14125.html[/link]
[link]http://forums.radiocontrolzone.com/showthread.php?t=208626[/link]
here is a couple links that may help.. from what i saw the acncm are great but they are too strong and end up causing other things to break. plus i read they strip out very easy. in these links they mention a couple other ones that sound good. hope you find some good info in one of these links.. jake
[link]http://www.rcbros.com/forum/forum_posts.asp?TID=1411&PN=1&TPN=1[/link]
[link]http://www.unlimitedengineering.com/forum/archive/index.php/t-14125.html[/link]
[link]http://forums.radiocontrolzone.com/showthread.php?t=208626[/link]
#12
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
I just ordered the GA 7075 T-6 Bulkhead Kit (front and back w/ braces). I don’t know if they come with the hinge pin set...but seems like a good price for that quality of product including the braces as well. It was $105 but should last longer than the truck.
JAM
JAM
#13
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
The GA 7075 bulks will arrive today…talk about fast FREE delivery…wow! Well I was wondering if anyone had some quick advice on how to take the truck apart…is there a particular order I need to follow. I am going to work on it this weekend, but unfortunately I don’t have a hinge pin set yet and will need to do some fast ordering or find them local. The LHS shop has the Integy Pins, but I’m a little worried about the quality.
On another note, we have had the Integy Piggy Back Shocks (MSR4) on for a few days of hard running/bashing (so hard the wheelie busted off) and they seem to be working great. I did turn down the adjustable collars a bit to stiffen them up and I’m running 70w oil.
What replacement wheelie bars do you guys recommend?
As always, any help would be appreciated.
JAM
On another note, we have had the Integy Piggy Back Shocks (MSR4) on for a few days of hard running/bashing (so hard the wheelie busted off) and they seem to be working great. I did turn down the adjustable collars a bit to stiffen them up and I’m running 70w oil.
What replacement wheelie bars do you guys recommend?
As always, any help would be appreciated.
JAM
#14
Join Date: Oct 2007
Location: Afton,
TN
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
Just watck how mch aluminum u put on. Put on aluminum bulkheads and RPM arms and u will be good to go. I would stay away from Integy hinge pins also as the will probably bend or snap on the first impact
There is no diassembly order that I know of. Just take the wheels and the engine of first. That will make it easyer to work with.
I blieve there are a few manufactors out there that make aluminum wheelie bars if thats what your getting at.
http://www3.towerhobbies.com/cgi-bin...&I=LXNSE3&P=ML or this even though its Integy
http://www3.towerhobbies.com/cgi-bin...?&I=LXTFV0&P=7
There is no diassembly order that I know of. Just take the wheels and the engine of first. That will make it easyer to work with.
I blieve there are a few manufactors out there that make aluminum wheelie bars if thats what your getting at.
http://www3.towerhobbies.com/cgi-bin...&I=LXNSE3&P=ML or this even though its Integy
http://www3.towerhobbies.com/cgi-bin...?&I=LXTFV0&P=7
#15
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
Thanks RACEMAXX24,
I understand the too much aluminum problem. I do need to put on some sort of wheelie bar that will withstand some roll over’s and rear landing jumps. I bid on an OEM replacement on eBay last night, but lost…I was just being too cheap and thought that if I was going to spend $10 of more for a replacement, I should just get a better product. Is this a common upgrade to aluminum?
Do you think the Integy wheelie bar will be ok?
I understand the too much aluminum problem. I do need to put on some sort of wheelie bar that will withstand some roll over’s and rear landing jumps. I bid on an OEM replacement on eBay last night, but lost…I was just being too cheap and thought that if I was going to spend $10 of more for a replacement, I should just get a better product. Is this a common upgrade to aluminum?
Do you think the Integy wheelie bar will be ok?
#16
Join Date: Oct 2007
Location: Afton,
TN
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
I haven't really heard on people breaking the stock wheelie bar. I would have to say that an aluminum wheelie bar is noy a common upgrade but i'm sure that there are advantages and disadvantges of aluminum wheelie bars as with all things.
I would say the Integy on should be fine looking at the pic but as I haven't tryed it, I can't tell u for sure.
I would say the Integy on should be fine looking at the pic but as I haven't tryed it, I can't tell u for sure.
#17
Senior Member
Join Date: Sep 2007
Location: dale city, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
RE: T-Maxx 4908 Aluminum Upgrades
traxxas says to take off the wheelie bar when bashing hard or jumping. if you broke your stock wheelie bar then you must have been doing some heavy bashing:}:}
mine has come off several times doing small jumps. i would think that the aluminum ones would bend before breaking. they sure would look nicer and be great for popping wheelies but if you are in to heavy backyard bashing i would either take it off first or buy a couple stock ones.
i am bidding on one stock one now on ebay. this guy must buy 4-5 tmaxxas at a time and part them out. i saw his wheelie bars sell from 99 cents to 8 bucks. even at 8 bucks that is about half price. take care,,jake
mine has come off several times doing small jumps. i would think that the aluminum ones would bend before breaking. they sure would look nicer and be great for popping wheelies but if you are in to heavy backyard bashing i would either take it off first or buy a couple stock ones.
i am bidding on one stock one now on ebay. this guy must buy 4-5 tmaxxas at a time and part them out. i saw his wheelie bars sell from 99 cents to 8 bucks. even at 8 bucks that is about half price. take care,,jake
#18
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
Just a little pic update...here are the GA 7075 Bulks and UE Knucklehead Shock Towers...the 17MM aluminum wheel hex's and Lunsford Racing Titanium Hinge Pins will be here today, so I should be able to get it back together tonight. I also ordered a set of Full Force Blue Aluminum Body post.
…more to come…
Thanks
JAM
http://i247.photobucket.com/albums/g...s/P1040147.jpg
http://i247.photobucket.com/albums/g...s/P1040150.jpg
…more to come…
Thanks
JAM
http://i247.photobucket.com/albums/g...s/P1040147.jpg
http://i247.photobucket.com/albums/g...s/P1040150.jpg
#20
Member
Thread Starter
RE: T-Maxx 4908 Aluminum Upgrades
ORIGINAL: racemaxx24
How long have those Integy shocks lasted u? The shafts bend very easy and the seals are crap.
How long have those Integy shocks lasted u? The shafts bend very easy and the seals are crap.