strv-103C "S-tank" scratch build
#29
Member
Thread Starter
Join Date: Dec 2006
Location: umeå, SWEDEN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
I am currently waiting for some suspension arms that I just bought from a tanker here in Sweden. When they arrive I will integrate them in my CAD-design and hopefully be able to make some parts for real. It was a long time since i actually made a some parts for this project so I would really want to make something soon not just making blueprints.
/Anders
/Anders
#30
Senior Member
Join Date: Jun 2008
Location: Bridgwater, UNITED KINGDOM
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
WOW! this looks brilliant! everything looks so ... un scratch built and proffesionall! nice work - keep it up!
will be following this project closely!
thanks,
matt
will be following this project closely!
thanks,
matt
#31
Junior Member
Join Date: Sep 2008
Location: Hamburg, GERMANY
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
Hello Anders,
your project is very interesting. It is amazing to see how you built the tank. Congratualations!!!
I sent you a PM with several questions - would be great to hear from you.
Regards,
Gecko
your project is very interesting. It is amazing to see how you built the tank. Congratualations!!!
I sent you a PM with several questions - would be great to hear from you.
Regards,
Gecko
#32
Member
Join Date: Sep 2008
Location: HishultHalland, SWEDEN
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
ORIGINAL: gww
You may be correct, but everything I've read suggests that they are fuel containers. Shoudn't be too bad with high flashpoint fuels (I think S-tank uses combination of diesel and gas turbine, so fuel is probably kerosene/diesel type)).
Geoff
ORIGINAL: ArmChairGeneral
I think the 'jerry cans' are active armor ? It would be fun to have a nice variety of nato/warsaw pact 1/16 armor to do modern IR battles.
I think the 'jerry cans' are active armor ? It would be fun to have a nice variety of nato/warsaw pact 1/16 armor to do modern IR battles.
You may be correct, but everything I've read suggests that they are fuel containers. Shoudn't be too bad with high flashpoint fuels (I think S-tank uses combination of diesel and gas turbine, so fuel is probably kerosene/diesel type)).
Geoff
The power pack in the S-103A and S-103B versions was a Rolls-Royce K60 disel which was used for normal operations, and a Boing gas-turbine which was brought into provide additional power for combat or even crossing difficult terrain. In the Strv-103C, however the Rolls-Royce engine was replaced by a more powerfull Detroit Disel 6V-53T 6-cylinder, although the gas-turbine has been retained uncharged.
goldenraven
#33
Member
Thread Starter
Join Date: Dec 2006
Location: umeå, SWEDEN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
Been a long time since i posted here, but I have much to do and so little time for my tanks. Anyway do anyone know the diameter and other data of a leopard 2 drive sprocket in 1:16 scale? I will probably use one on the S-tank since it will not be so vissible anyway.
/affe
/affe
#34
Member
Join Date: May 2008
Location: Reading, UNITED KINGDOM
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
You can always use a voltage regulator to get the voltage down so you can use the DMD.
Guess it uses 7.2V, could use either a 6V regulator or 9V and a resistor.
Guess it uses 7.2V, could use either a 6V regulator or 9V and a resistor.
#36
RE: strv-103C "S-tank" scratch build
if you flip it over you will see on the bottom side six holes with screws in them unscrew the screws and the top will come off .
thanks
jimmy
thanks
jimmy
#37
Member
Thread Starter
Join Date: Dec 2006
Location: umeå, SWEDEN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
RE: strv-103C "S-tank" scratch build
It was a long time since I posted about this project, the reason i that I am now writing about it in a swedish RC-tank forum. I will try to post here when i have reached more progress. If anyone want to se the current status klick on the link below.
[link=http://minipansar.ecommunity.se/fregende-vt367.html?postdays=0&postorder=asc&start=0]http://minipansar.ecommunity.se/fregende-vt367.html?postdays=0&postorder=asc&start=0[/link]
/Affe
[link=http://minipansar.ecommunity.se/fregende-vt367.html?postdays=0&postorder=asc&start=0]http://minipansar.ecommunity.se/fregende-vt367.html?postdays=0&postorder=asc&start=0[/link]
/Affe