Great Planes Giant Big Stick & DL50
#1
Thread Starter
My Feedback: (2)
Join Date: Oct 2002
Location: Panama City, FL
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Great Planes Giant Big Stick & DL50
That's right! DL50 on a Great Planes Giant Big Stick! Tricycle gear configeration, seperate nose wheel steering servo, and flaps. Two inches of clearance with a 22x8! Futaba 7C 2.4, 7 channel receiver, 2000mah Hydimax 6v on the servos, and a 750mah 4.8 Hydrimax on the ingnition. Not that anyone is interested.. I'll be providing photos tomorrow late afternoon after the break in! This will be a transport for a T-Rex 450 Heli. Carried to altitude then dropped for rotor engagement. As well as a platform for a couple other ideas I have. Should be interesting.
#5
Senior Member
My Feedback: (24)
Join Date: Dec 2001
Location: AUBURN,
GA
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
RE: Great Planes Giant Big Stick & DL50
ORIGINAL: Super08
I would love to see the pics. You must have a long set of legs on it to get the prop clearance. I had fun getting enough ground clearance for a 20" prop on a Fuji 43. Flys great, it must be insane with the DL.
I would love to see the pics. You must have a long set of legs on it to get the prop clearance. I had fun getting enough ground clearance for a 20" prop on a Fuji 43. Flys great, it must be insane with the DL.
How about with a tuned pipe
Milton
#6
RE: Great Planes Giant Big Stick & DL50
ORIGINAL: RadarController
That's right! DL50 on a Great Planes Giant Big Stick! Tricycle gear configeration, seperate nose wheel steering servo, and flaps. Two inches of clearance with a 22x8! Futaba 7C 2.4, 7 channel receiver, 2000mah Hydimax 6v on the servos, and a 750mah 4.8 Hydrimax on the ingnition. Not that anyone is interested.. I'll be providing photos tomorrow late afternoon after the break in! This will be a transport for a T-Rex 450 Heli. Carried to altitude then dropped for rotor engagement. As well as a platform for a couple other ideas I have. Should be interesting.
That's right! DL50 on a Great Planes Giant Big Stick! Tricycle gear configeration, seperate nose wheel steering servo, and flaps. Two inches of clearance with a 22x8! Futaba 7C 2.4, 7 channel receiver, 2000mah Hydimax 6v on the servos, and a 750mah 4.8 Hydrimax on the ingnition. Not that anyone is interested.. I'll be providing photos tomorrow late afternoon after the break in! This will be a transport for a T-Rex 450 Heli. Carried to altitude then dropped for rotor engagement. As well as a platform for a couple other ideas I have. Should be interesting.
-Pat