black mamba

I use HPI's hump pack. They are all over ebay for cheap and really wake up your servos.

hghflyrjd1

im looking for a multistation charger that will plug to a house wall charger

Van Pelt

Get the Dynamite Field Charger and a power supply.

Power supply option: http://www3.towerhobbies.com/cgi-bin...&I=LXRJN7&P=ML

hhhs001

The RTR radio "TF-3" has this dial thingy called the "Steering Dual Rate", which kinda mimics the way EPA works. You could adjust your steering servo end-points to some degree using that. Its on page 9 of the Savage X RTR manual.

46u

My Feedback: (3)

I know this but it is not EPA. Might work to a point but not as good EPA. Steering Dual Rate affects both right and left where EPA you set them one at a time. With DR this can leave the turning radius different from left to right.

hghflyrjd1

and this will add a charge port on the side of the reciver box?


http://www3.towerhobbies.com/cgi-bin...?&I=LXJ778&P=M

46u

My Feedback: (3)

If you look at the below picture you will see a blue plug zip tied to the roll bar. this is my charging plug coming from the switch I posted a ling to in one of my above post. I do not have a X radio box and this works fine.

hghflyrjd1

ok so once u have that adaptor plug on... that replaces the stock on off switch? and then once u yurn it to the off position u can then use that blue plug to charge?

46u

My Feedback: (3)

Yes but mine started as a kit and did not come with a switch so I got that one. Being mine started as a 4.6SS pre X there is very little pre X. Much of it is not even X but up grades for racing.

hghflyrjd1

so whats the difernece between these two switch adaptors? besides PRICE and Brand anything?

http://www3.towerhobbies.com/cgi-bin...&I=LXH462&P=ML

http://www3.towerhobbies.com/cgi-bin...&I=LX0947&P=ML

i need it for this battery

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMEY1

KID_EVIL!

I noticed that the fatuba has a J connector and the Airtronics has a Z connector. The hump pack says Universal connector. I don't know if Universal means it will fit both.. They look quite alike in the pictures though. I have no answer just details.

black mamba

Just get yourself a XL on/off switch. It has the proper connector to run a hump pack and also comes with the charge lead. I got mine off of ebay.

46u

My Feedback: (3)

Most but not all connectors this day and age are compatible with each other.