Checking Voltage on Fromeco Regulator
03-29-2009, 11:26 AM
#1
Thread Starter
My Feedback: (9)
Join Date: Apr 2004
Location: Olathe,
KS
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Checking Voltage on Fromeco Regulator
Can someone tell me how to check the voltage coming out of a Fromeco regulator? I know how to change the voltage using the two pins on the side. I'm just not sure how to check the voltage it is being regulated down to. Right now I have the 2600 lithium battery and the regulator plugged into a switch.
Thanks in advance,
Keith
Thanks in advance,
Keith
03-29-2009, 11:38 AM
#2
Thread Starter
My Feedback: (9)
Join Date: Apr 2004
Location: Olathe,
KS
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
RE: Checking Voltage on Fromeco Regulator
One other thing I should mention is that the other wire coming out of the regulator I am wanting to check has been soldered to the wire going to the ignition for a DA 50.
03-29-2009, 02:44 PM
#4
Senior Member
My Feedback: (31)
Join Date: Mar 2002
Location: Kannapolis,
NC
Posts: 7,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: Checking Voltage on Fromeco Regulator
plug a voltmeter on the other end of the reg and turn the switch on if you have already connected it to one. the voltage u see on that end is what you have regulated it to....[8D]
