Landslide Engineering Requests
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: LIVE OAK, FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Landslide Engineering Requests
ANY body with ANY ideas on how or what to improve on the Redcat Landslide or any of the LT and 21 series, Post them and see what we can get...
I would like to see
1. Solid built tranny, metal gears and housing(Isee some metal gears are here already, but not all of them).
2. thicker dogbones all the way around and middle
3. Better built servos
I'm only an amature and these are the few things Ihave encountered with my first R/C
I would like to see
1. Solid built tranny, metal gears and housing(Isee some metal gears are here already, but not all of them).
2. thicker dogbones all the way around and middle
3. Better built servos
I'm only an amature and these are the few things Ihave encountered with my first R/C
#2
Member
Join Date: Mar 2009
Location: Cherry Creek, NY
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
RE: Landslide Engineering Requests
Every time I take out my landslide lt something goes wrong I paid top dollar from red cat then so far sunk almost 400 bucks fixing it more than what I paid for the fu#$*ng thing fast and fun when not fixing it all the time!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#4
Senior Member
Join Date: Dec 2007
Location: Mesa,
AZ
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
RE: Landslide Engineering Requests
Im sorry but you shouldnt be breaking things all the time. I mean ya when you hit something or crash its possible. These are beginner friendly vehicles. If they added a bunch of parts like you want, then its gonna cost more, and turn more people away.
#6
Member
Join Date: Mar 2009
Location: Cherry Creek, NY
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
RE: Landslide Engineering Requests
Cheap plastic parts bad 2 speed trannys I dont run in to things ! Some things might have been my fault like runnig on dry pavment when my front end came apart during break in but its a poor build!!!!!!!!!!!!!!!!!!!!!!!!!
#7
Member
Join Date: May 2009
Location: Annville,
PA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
RE: Landslide Engineering Requests
I also just sold a landslide and he's had a lot of stuff go wrong tranny went out during breakin i was there when it happened the brake disc spun on the shaft during brakein we made a new one out of alum. ruller? works great and the pin on the crank for the pull start pushed in i had to pull the engine all apart to fix it. just a bad one i guess my truck was perfect had no problems at all and have a gallon ran in it no problems yet!!