What After Run?
07-01-2009, 06:52 PM
#3
Senior Member
Join Date: Mar 2005
Location: Lompoc ,
CA
Posts: 1,469
Likes: 0
Received 0 Likes
on
0 Posts
RE: What After Run?
hobby co for convenience.
Any automatic transmission fluid or air tool oil with do the same thing. I bought the hobbieco afterrun oil for the bottle and refill it with ATF
Any automatic transmission fluid or air tool oil with do the same thing. I bought the hobbieco afterrun oil for the bottle and refill it with ATF
07-01-2009, 09:42 PM
#4
Member
Join Date: May 2003
Location: Valencia,Venezuela, VENEZUELA
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
RE: What After Run?
i agree, after run oil is red, automatic transmission fluid is red, and smells exactly as after run oil, i have been using it for the past 20 years
07-02-2009, 05:38 AM
#5
Senior Member
My Feedback: (1)
Join Date: Dec 2002
Location: Liquored, FL,
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
RE: What After Run?
http://www.horizonhobby.com/Products...rodID=EVOX1000
Many racers in Florida use this. We obviously live in an area of humidity and heat.. We are a magnet for rust. This stuff is hands down the best penetrating oil I've ever used.
Randy Bridge
Many racers in Florida use this. We obviously live in an area of humidity and heat.. We are a magnet for rust. This stuff is hands down the best penetrating oil I've ever used.
Randy Bridge
07-02-2009, 07:03 AM
#6
My Feedback: (1)
Join Date: Dec 2001
Location: Waseca,
MN
Posts: 8,456
Likes: 0
Received 0 Likes
on
0 Posts
RE: What After Run?
I've always used the Marvel Mystery Air Tool oil without issue.
The only motor I ever had a problem with was the early OS 46 AX motors, they would rust by just looking at them.
The only motor I ever had a problem with was the early OS 46 AX motors, they would rust by just looking at them.
07-03-2009, 08:56 AM
#8
Senior Member
Join Date: Mar 2006
Location: , MN
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
RE: What After Run?
He means when they first came out, like the first year, the bearings were cheap and they rusted just talking about them.
But there is a revison to the AX, look at where the back cover screws are, new ones have blind holes with a slightly different passage at that point of the case
This happened last year
But there is a revison to the AX, look at where the back cover screws are, new ones have blind holes with a slightly different passage at that point of the case
This happened last year
