Super Tune Your Super Vee 27
#4576
Member
Join Date: Dec 2004
Location: charlottesville,
VA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: Tnsol
Ok, that's what I would have done finally but I thought it wouldn't last / resist a lot... I'll give that a try !
I won't have to drill the hull as I'm using a 3PK Radio with 2,4GHz module. The receiver antenna is only about 3in long...
ORIGINAL: frankenjet
OOps read this again, now I know what you mean. I just used a small piece of the colored electical tape to cover the antenna and hatch holes.
OOps read this again, now I know what you mean. I just used a small piece of the colored electical tape to cover the antenna and hatch holes.
I won't have to drill the hull as I'm using a 3PK Radio with 2,4GHz module. The receiver antenna is only about 3in long...
Steve
#4577
Senior Member
Join Date: Mar 2005
Location: Erie,
PA
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
Well the silicone is dry finally.
I hope to get it out tomorrow and see how it is.
I too am thinking about moving the water pick up.
More cooling never hurt anything
I hope to get it out tomorrow and see how it is.
I too am thinking about moving the water pick up.
More cooling never hurt anything
#4580
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
Well im ready for my self to find some free time so i can get out to the pond.
Changed my set up once again.
Well im ready for my self to find some free time so i can get out to the pond.
Changed my set up once again.
also what foam did you use up front?
Thanks
#4581
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
Feigao 8xl and the foam up front is just yellow noodle.
When i got my hands on the green i didnt feel like pulling out my 12L just to replace the foam.
When i pulled the 12L and put in the 8XL i forgot all about the foam, so the yellow will be in for a little while longer.
When i got my hands on the green i didnt feel like pulling out my 12L just to replace the foam.
When i pulled the 12L and put in the 8XL i forgot all about the foam, so the yellow will be in for a little while longer.
#4583
Senior Member
Join Date: Mar 2005
Location: Erie,
PA
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
I like the noodle pieces in the back of the boat.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
#4584
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: srt10
What prop are you going to use with the 8XL ?
also give us the update on how this setup runs!
Thanks
What prop are you going to use with the 8XL ?
also give us the update on how this setup runs!
Thanks
Made a couple changes after the first run and made big improvements.
Wont be running a k48 anymore.
ORIGINAL: monsterbrad
I like the noodle pieces in the back of the boat.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
I like the noodle pieces in the back of the boat.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
Use to run lipos awhile back but got out of that scene.
Yes, tape the hatch.
I can run my boat 3 or 4 times on 3 or 4 different sets of packs and i wont have a drop of water in my hull.
I ran 2 packs through it this evening and i didnt see a single drop of water anywhere on the inside of my hull.
#4585
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
I took it out this evening about an hour or so ago and ran a k48 prop.
Made a couple changes after the first run and made big improvements.
Wont be running a k48 anymore.
Yup, just extra floatation incase the boat decides to get air born and land on me upside down.
Use to run lipos awhile back but got out of that scene.
Yes, tape the hatch.
I can run my boat 3 or 4 times on 3 or 4 different sets of packs and i wont have a drop of water in my hull.
I ran 2 packs through it this evening and i didnt see a single drop of water anywhere on the inside of my hull.
ORIGINAL: srt10
What prop are you going to use with the 8XL ?
also give us the update on how this setup runs!
Thanks
What prop are you going to use with the 8XL ?
also give us the update on how this setup runs!
Thanks
Made a couple changes after the first run and made big improvements.
Wont be running a k48 anymore.
ORIGINAL: monsterbrad
I like the noodle pieces in the back of the boat.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
I like the noodle pieces in the back of the boat.
Looks good
Throw some Lipo's at that thing and it will be sick.
Had mine at the lake today and the seal was a failure took it out.
Just going to start taping the lid.
easier and hopefully no water in the hull or very little.
Use to run lipos awhile back but got out of that scene.
Yes, tape the hatch.
I can run my boat 3 or 4 times on 3 or 4 different sets of packs and i wont have a drop of water in my hull.
I ran 2 packs through it this evening and i didnt see a single drop of water anywhere on the inside of my hull.
I take it, the 48 was to much prop?
Did you have a gps to get some speed #s
and why did you get away from lipos?
#4586
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: srt10
I take it, the 48 was to much prop?
Did you have a gps to get some speed #s
and why did you get away from lipos?
I take it, the 48 was to much prop?
Did you have a gps to get some speed #s
and why did you get away from lipos?
I believe it was on the border line of too much and just perfect for what my set up is.
Im going to try and take some timing away from the motor and giving it another go with the k48 first.
No GPS for speeds.
I do have video though
No lipo because i dont need them.
Have ran them before and just wasnt impressed with what i had.
I actually only had about 40 china packs. Never had a problem with them, its just ive ran similiar speeds on my nimh packs.
So i sold the lipo's and bought more nimh's. I run 16 and 18 cells in my supervee at a time.
Whenever i get back into lipos, i'll end up picking up some Turnigy packs or Zippy packs.
#4587
Senior Member
Join Date: Oct 2006
Location: Greensboro,
NC
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
Well im ready for my self to find some free time so i can get out to the pond.
Changed my set up once again.
Well im ready for my self to find some free time so i can get out to the pond.
Changed my set up once again.
thanks tmaxx445
#4588
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
I believe it was on the border line of too much and just perfect for what my set up is.
Im going to try and take some timing away from the motor and giving it another go with the k48 first.
No GPS for speeds.
I do have video though
No lipo because i dont need them.
Have ran them before and just wasnt impressed with what i had.
I actually only had about 40 china packs. Never had a problem with them, its just ive ran similiar speeds on my nimh packs.
So i sold the lipo's and bought more nimh's. I run 16 and 18 cells in my supervee at a time.
Whenever i get back into lipos, i'll end up picking up some Turnigy packs or Zippy packs.
ORIGINAL: srt10
I take it, the 48 was to much prop?
Did you have a gps to get some speed #s
and why did you get away from lipos?
I take it, the 48 was to much prop?
Did you have a gps to get some speed #s
and why did you get away from lipos?
I believe it was on the border line of too much and just perfect for what my set up is.
Im going to try and take some timing away from the motor and giving it another go with the k48 first.
No GPS for speeds.
I do have video though
No lipo because i dont need them.
Have ran them before and just wasnt impressed with what i had.
I actually only had about 40 china packs. Never had a problem with them, its just ive ran similiar speeds on my nimh packs.
So i sold the lipo's and bought more nimh's. I run 16 and 18 cells in my supervee at a time.
Whenever i get back into lipos, i'll end up picking up some Turnigy packs or Zippy packs.
#4589
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: tmaxx445
What battery cells are those?
thanks tmaxx445
What battery cells are those?
thanks tmaxx445
Ib 4200's
You want them?
ORIGINAL: srt10
Do you have a link to your video?
Do you have a link to your video?
#4590
Senior Member
Join Date: Oct 2006
Location: Greensboro,
NC
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
Ib 4200's
You want them?
let me get it uploaded first.
ORIGINAL: tmaxx445
What battery cells are those?
thanks tmaxx445
What battery cells are those?
thanks tmaxx445
Ib 4200's
You want them?
ORIGINAL: srt10
Do you have a link to your video?
Do you have a link to your video?
tmaxx445
#4591
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
#4593
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
Thats just a big ol k48
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
#4594
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: WakeBoardnBash
Thats just a big ol k48
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
Thats just a big ol k48
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
Looks good Wake!
I just got a 8XL for my Mean Machine last week, maybe I will give it a try in my SV, using a CF48 on 4s
#4596
Senior Member
Join Date: Jan 2007
Location: Gifford,
IL
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: srt10
Looks good Wake!
I just got a 8XL for my Mean Machine last week, maybe I will give it a try in my SV, using a CF48 on 4s
ORIGINAL: WakeBoardnBash
Thats just a big ol k48
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
Thats just a big ol k48
Im going to prop down next time and see what happends.
There should have been a ton more video.
I ran the boat for about 5 minutes on the 16 cells.
Girlfriend thought it was recording and it wasnt. [:@]
Only got 50 some second of video.
Looks good Wake!
I just got a 8XL for my Mean Machine last week, maybe I will give it a try in my SV, using a CF48 on 4s
#4597
Senior Member
My Feedback: (38)
Join Date: Jul 2009
Location: , MI
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
Nice setup wake! That thing looks more stable than my SV with the stock motor! My experience with lipos has been the opposite as yours. I thought the SV27 was completely lame until I tried my lipos in it. It made an incredable difference.
I'm thinking of running either a 12xl on 25.2v lipo, or a 2650kv Neu motor on 16.8v lipo in my supervee. Your video just gave me a boost in confidence!
Keep em comin bro! I wanna see what it does with the smaller prop.
I'm thinking of running either a 12xl on 25.2v lipo, or a 2650kv Neu motor on 16.8v lipo in my supervee. Your video just gave me a boost in confidence!
Keep em comin bro! I wanna see what it does with the smaller prop.
#4598
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: keithbradley
Nice setup wake! That thing looks more stable than my SV with the stock motor! My experience with lipos has been the opposite as yours. I thought the SV27 was completely lame until I tried my lipos in it. It made an incredable difference.
I'm thinking of running either a 12xl on 25.2v lipo, or a 2650kv Neu motor on 16.8v lipo in my supervee. Your video just gave me a boost in confidence!
Keep em comin bro! I wanna see what it does with the smaller prop.
Nice setup wake! That thing looks more stable than my SV with the stock motor! My experience with lipos has been the opposite as yours. I thought the SV27 was completely lame until I tried my lipos in it. It made an incredable difference.
I'm thinking of running either a 12xl on 25.2v lipo, or a 2650kv Neu motor on 16.8v lipo in my supervee. Your video just gave me a boost in confidence!
Keep em comin bro! I wanna see what it does with the smaller prop.
A 12XL on 6s, 22.2v (not 25.2v) would be a great setup and not pull to many amps.. 30,858rpm
the 2650kv Neu on 4s 14.8v (not 16.8v) would be to much rpm and waste power.. 39,220rpm
#4599
Senior Member
My Feedback: (38)
Join Date: Jul 2009
Location: , MI
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
I'm a bit new to RC boats...What happens with too much RPM in a boat? The 2650 is made to run 4 cells in a truck (I run a 2200 on 6 cells in my E Revo). Does the prop cavitate if it's spun too fast? ...Or is it a matter of heat (which is considerably different in the Neu motors vs. the Feigao). Thanks for the help.
A fully charged lipo is 4.2v/cell. 6 cells is actually 25.2v and 4 cells 16.8v when fully charged. This is why ESCs like the MMM are rated for 25.2v. Nominal voltage is 3.7 per cell which would net the numbers you listed (22.2/14.8)
A fully charged lipo is 4.2v/cell. 6 cells is actually 25.2v and 4 cells 16.8v when fully charged. This is why ESCs like the MMM are rated for 25.2v. Nominal voltage is 3.7 per cell which would net the numbers you listed (22.2/14.8)
#4600
My Feedback: (20)
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,973
Likes: 0
Received 0 Likes
on
0 Posts
RE: Super Tune Your Super Vee 27
ORIGINAL: keithbradley
I'm a bit new to RC boats...What happens with too much RPM in a boat? The 2650 is made to run 4 cells in a truck (I run a 2200 on 6 cells in my E Revo). Does the prop cavitate if it's spun too fast? ...Or is it a matter of heat (which is considerably different in the Neu motors vs. the Feigao). Thanks for the help.
A fully charged lipo is 4.2v/cell. 6 cells is actually 25.2v and 4 cells 16.8v when fully charged. This is why ESCs like the MMM are rated for 25.2v. Nominal voltage is 3.7 per cell which would net the numbers you listed (22.2/14.8)
I'm a bit new to RC boats...What happens with too much RPM in a boat? The 2650 is made to run 4 cells in a truck (I run a 2200 on 6 cells in my E Revo). Does the prop cavitate if it's spun too fast? ...Or is it a matter of heat (which is considerably different in the Neu motors vs. the Feigao). Thanks for the help.
A fully charged lipo is 4.2v/cell. 6 cells is actually 25.2v and 4 cells 16.8v when fully charged. This is why ESCs like the MMM are rated for 25.2v. Nominal voltage is 3.7 per cell which would net the numbers you listed (22.2/14.8)
Boat motors are on constant load and will pull more amps than in a truck or car if using to big of a prop and will heat up fast...
better to go low kv and higher volts, pulls less amps
and lipos are rated and sold as, 2s -7.4v, 3s- 11.1v, 4s -18.5v, 6s -22.2v, etc
if the cells are not balanced and charged correctly they will not be at 4.2v per cell