more questions from the newbie
#1
Junior Member
Thread Starter
Join Date: Aug 2009
Location: Windfall, IN
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
more questions from the newbie
i have a volcano stx, 1. my front wheel drive isn't working, the drive shaft isn't spinning, what could that be? 2.i would like to get some chrome wheels and new tires but haven't seen any cool volcano ones, so what type of wheels do i need to get and what size, and adapter everything, i may goa lil bigger if possible. 3. what temp is a vx.18 supposed to be running at, and the small blackscrew on the front of the carb is the idle right or no? i think thats it for now,sorry for all the questions, thanks travis
#2
Senior Member
Join Date: Jun 2007
Location: Mesa,
AZ
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
RE: more questions from the newbie
1) Check the set screws that are in the drive cups.
2) Any 2.8 wheel with a 12mm wheel hex will work. Traxxas has a bunch of different ones
3) The Vx.18 opperating temp should be between 200-250 depending on outside temp, fuel. tune, and how your running it
Yes the little black screw in the middle of the carb is the idle screw
2) Any 2.8 wheel with a 12mm wheel hex will work. Traxxas has a bunch of different ones
3) The Vx.18 opperating temp should be between 200-250 depending on outside temp, fuel. tune, and how your running it
Yes the little black screw in the middle of the carb is the idle screw