POST YOUR WORKS HERE!
#961
Senior Member
Join Date: Nov 2006
Location: Nicosia, CYPRUS
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
RE: POST YOUR WORKS HERE!
this is my first body painted using an airbrush...(actually the 2nd because i did it once and was a mess and i removed the paint and did again this design which is different from the initial lol)
anyway... i think it turned out nice... i like it
anyway... i think it turned out nice... i like it
#964
Member
Join Date: Nov 2009
Location: gainesville, FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
RE: POST YOUR WORKS HERE!
My first true paintjob on a RC body. It's a rattle can job. I used the clear "ice" then put down some krylon red for plastic then with white top coat. Did the same for the air cleaner cover except I used some rustoleum silver I had laying around.
This is the '70 Hemi 'Cuda body for the HPI Savage.
and the Traxxas T-Maxx
http://www3.towerhobbies.com/cgi-bin...&I=LXGTE6&P=ML
Fits extended stampede chassis like the FLM
Just did this one saturday . I used a dremel to cut it apart. Next time I will get some body scissors. :sweat:
Before I cut down the front body mount
My bash body and true first paintjob . I didn't know I had to remove the film off the outside before putting decals on :ha::lol:.
After some more trimming and bashing
Then I grabbed some silver and sprayed the whole inside
I was bored and painted these 2 stock bodies on the outside.
My "Optimus Prime" body . Used temp tattoos for the logos .
I peeled all the decals off for this one and stuck them back on after I painted it.
My Florida Gators body (I didn't have any orange or blue paint on hand"
Not so great but it's another basher.
I used some temp tattoos for some of it .
This is the '70 Hemi 'Cuda body for the HPI Savage.
and the Traxxas T-Maxx
http://www3.towerhobbies.com/cgi-bin...&I=LXGTE6&P=ML
Fits extended stampede chassis like the FLM
Just did this one saturday . I used a dremel to cut it apart. Next time I will get some body scissors. :sweat:
Before I cut down the front body mount
My bash body and true first paintjob . I didn't know I had to remove the film off the outside before putting decals on :ha::lol:.
After some more trimming and bashing
Then I grabbed some silver and sprayed the whole inside
I was bored and painted these 2 stock bodies on the outside.
My "Optimus Prime" body . Used temp tattoos for the logos .
I peeled all the decals off for this one and stuck them back on after I painted it.
My Florida Gators body (I didn't have any orange or blue paint on hand"
Not so great but it's another basher.
I used some temp tattoos for some of it .
#969
Junior Member
Join Date: Jan 2010
Location: HorshamVictoria, AUSTRALIA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: POST YOUR WORKS HERE!
Hi,
My First paint job on an R/C body. It's my new Nanda NRT-3 Truggy.
It's Auto-Air Hot Rod Sparkle White on the Sealer Dark Base. Made the masks and decals at work.
This is painted on exterior as didn't have new body. Will be doing new one internally shortly.
I have been painting for years on bikes and cars etc but this is my new hobby so hopefully pick up some work from it aswell.
My First paint job on an R/C body. It's my new Nanda NRT-3 Truggy.
It's Auto-Air Hot Rod Sparkle White on the Sealer Dark Base. Made the masks and decals at work.
This is painted on exterior as didn't have new body. Will be doing new one internally shortly.
I have been painting for years on bikes and cars etc but this is my new hobby so hopefully pick up some work from it aswell.
#970
Senior Member
Join Date: Sep 2005
Location: Dead Center,
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
RE: POST YOUR WORKS HERE!
Heres a few I done in the last week or two. The rockstar idea I got from victory-rc a page or two back. The K&N was just somthing I tossed together.
Im working on a few more, should be done by next week.
Im working on a few more, should be done by next week.
#972
Senior Member
Join Date: Sep 2005
Location: Dead Center,
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
RE: POST YOUR WORKS HERE!
Heres one I just painted for my sons slash. The carbon fiber turned out pretty cool. I just might get good at this painting thing yet...lol