TX & RX
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2008
Location: Debary,
FL
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
TX & RX
Would like to know if a tx and rx can be used with a brushed motor system as well as a brushless system as long as the esc matches up with the components. Its a 2.4 ghs tx and rx from a brushed heli set up. Would like to use it on a edf jet.
#2
Senior Member
My Feedback: (2)
Join Date: Sep 2004
Location: Johns Creek,
GA
Posts: 7,457
Likes: 0
Received 0 Likes
on
0 Posts
RE: TX & RX
the answer to the first question is Yes......
it doesn't care....
but your comment of where it comes from could be a concern.....
many TX's that come with RTF Heli's... like the Axe, etc. etc. etc.
have mixing (for the swash) built in that make them non-usable for airplanes
so if it is just a standard TX...then yes. assuming the rest of the electronics are set up properly.
but if it is a pre-mixed heli radio, you may have some challenges
it doesn't care....
but your comment of where it comes from could be a concern.....
many TX's that come with RTF Heli's... like the Axe, etc. etc. etc.
have mixing (for the swash) built in that make them non-usable for airplanes
so if it is just a standard TX...then yes. assuming the rest of the electronics are set up properly.
but if it is a pre-mixed heli radio, you may have some challenges