Some KT questions
#1
Junior Member
Thread Starter
Join Date: Jan 2010
Location: , FL
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Some KT questions
I was given an older model Tamiya KT. I would like to set it up with a newer gearbox (mine uses one motor with a clutch system) and steel tracks as well as other parts to be determined. Where is a good place to find these parts and are Tiger 1 parts interchangeable?
#2
Senior Member
Join Date: Mar 2007
Location: Brea, CA
Posts: 1,751
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some KT questions
The gear boxes and DMD Units are interchangeable between the Tamiya full option Tiger IE and the King Tiger.
For left and right gear boxes visit here: http://www.aaftankmuseum.com/kingtigermain.htm
For Tracks: http://www.mitosal.com/kingtiger.html
For idler upgrades and other King Tiger parts: http://www.etoarmour.com/products.php?ViewCategory=9
Go here to find free instructions for the full option King Tiger: http://members.iinet.net.au/~wackywheelz/manuals/
Search ebay Tamiya DMD for parts deals.
Go here for the KT full option parts list: http://www.tamiyausa.com/product/rcp...s&kit_id=56018
For left and right gear boxes visit here: http://www.aaftankmuseum.com/kingtigermain.htm
For Tracks: http://www.mitosal.com/kingtiger.html
For idler upgrades and other King Tiger parts: http://www.etoarmour.com/products.php?ViewCategory=9
Go here to find free instructions for the full option King Tiger: http://members.iinet.net.au/~wackywheelz/manuals/
Search ebay Tamiya DMD for parts deals.
Go here for the KT full option parts list: http://www.tamiyausa.com/product/rcp...s&kit_id=56018
#3
Senior Member
Join Date: May 2007
Location: paranaque, PHILIPPINES
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some KT questions
Hi, Sources with fair prices would be tamiyatown (USA) and jr-rc (Japan) - both ebay sellers. Note though that the L/R gearbox, DMD and MFU units would easily cost $300. Add the speaker, recoil, gun elevation and turret rotation assemblies, gun flash unit, etc. and you're looking at close to $500 and almost the cost of a full-option kit.
#4
Senior Member
Join Date: Jun 2008
Location: Nottinghamshire, UNITED KINGDOM
Posts: 163
Likes: 0
Received 2 Likes
on
1 Post
RE: Some KT questions
i bought one of these kt's with the single motor, i fitted Impact TU's Impact heavy duty metal tracks (look awesome and weigh a lot) then fitted Heng long RX18 electronics. The gearboxes are noisy (all steel gears) so the tank running sound is a little weak. Runs ok, but struggles a little on grass surface. Have now fitted more powerful motors, which is a little better. Im sure if i fit the plastic tracks, it will run even better, but the metal tracks look good. Connected a PC speaker to the RX 18.
don't think it will be as good as the Tamiya DMD setup but its certainly cheaper.
gearbox was £110 tracks were £95 RX18 £17 (already had the heng long transmitter) upgrade motors were £8 each. You can get cheaper metal tracks now, and probably the gearboxes as well.
Kev
don't think it will be as good as the Tamiya DMD setup but its certainly cheaper.
gearbox was £110 tracks were £95 RX18 £17 (already had the heng long transmitter) upgrade motors were £8 each. You can get cheaper metal tracks now, and probably the gearboxes as well.
Kev
#5
Senior Member
Join Date: Oct 2007
Location: St Catharines,
ON, CANADA
Posts: 1,481
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some KT questions
RCCOMMAND would have everything you need. I have fitted the 3:1 gears into my older tamyia KT (with metal tracks). Using the RX 1* board it works great