Reedy Brushless combo cogging...
#1
Senior Member
Thread Starter
Join Date: Jun 2008
Location: , SPAIN
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Reedy Brushless combo cogging...
Hi,
My BL system cogs when I open up the throttle, a little at the bottom, smooths out, cut out half throttle and then smooth until the end. Im using 12/60t gearing and 2s 2200mah 20C lipos... what could be causing this? Could it be the receiver glitching? im running the stock radio,,, maybe try with my dx3r? Do I need to calibrate again? Thanks!
My BL system cogs when I open up the throttle, a little at the bottom, smooths out, cut out half throttle and then smooth until the end. Im using 12/60t gearing and 2s 2200mah 20C lipos... what could be causing this? Could it be the receiver glitching? im running the stock radio,,, maybe try with my dx3r? Do I need to calibrate again? Thanks!