SAITO FG 20
#26
Junior Member
My Feedback: (6)
Join Date: Sep 2002
Location: Oakland,
CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: SAITO FG 20
Thanks for the tip on carb settings. Mine actually runs at 6 low and 1 1/2+ on the high end. I have another question. What tank size do you recommend? Do you think it'll power a 1/4 scale Cub?
#27
My Feedback: (17)
RE: SAITO FG 20
ORIGINAL: Miata Man
Thanks for the tip on carb settings. Mine actually runs at 6 low and 1 1/2+ on the high end. I have another question. What tank size do you recommend? Do you think it'll power a 1/4 scale Cub?
Thanks for the tip on carb settings. Mine actually runs at 6 low and 1 1/2+ on the high end. I have another question. What tank size do you recommend? Do you think it'll power a 1/4 scale Cub?
#29
Thread Starter
Join Date: Jun 2003
Location: Navarre,
FL
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
RE: SAITO FG 20
Havent done much flying lately, work has me tied down.
I can post up some install pics if u still need them, I used the Saito Alum mount an it was pretty straight forward. just let me know.
Th FG20 when the needles are set properly runs ok... ocasionally it will act like i have air bubbles in the tank and miss in the midrage.
I hope to get more time this season to fly her.
Spectre
I can post up some install pics if u still need them, I used the Saito Alum mount an it was pretty straight forward. just let me know.
Th FG20 when the needles are set properly runs ok... ocasionally it will act like i have air bubbles in the tank and miss in the midrage.
I hope to get more time this season to fly her.
Spectre