VIDEO OF FIRST BUILD/ A SCRATCH BUILD AT THAT
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: wisconsin dells ,
WI
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
VIDEO OF FIRST BUILD/ A SCRATCH BUILD AT THAT
over the past few weeks i dicided to build an air boat. weilding a os .46 engine this little boat cruises, its 24 inches long, 14.5 high (top of rudder), and 11 inches at its widest in the middle. on the rear rudder i added a small down foil to help keep the nose of the boat in the water. (i porpises pretty badly without it, it still does however not nearly as bad) the hull of the boat is foam, mdf and ply wood and fiberglass. ill try to get a video up soon, lemme know what you think so far with the pis.
#3
Senior Member
Thread Starter
Join Date: Feb 2004
Location: wisconsin dells ,
WI
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
RE: VIDEO OF FIRST BUILD/ A SCRATCH BUILD AT THAT
yea ive rolled it a couple of times, i think that im going to relocate the gastank as well, its up near the engine mount, in going to move it into the hull and forward a bit. im painting it rightnow as well pics by the end of the day.
please comment,
please comment,
#5
Senior Member
Thread Starter
Join Date: Feb 2004
Location: wisconsin dells ,
WI
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
RE: VIDEO OF FIRST BUILD/ A SCRATCH BUILD AT THAT
willl try to get a video today, i dont have a v cam but im sure the on on my reg. cam will do., but heres the new paint job, took a while! the color green was achieved by 4 diferent lavers of color, and then a clear sealer, (a painstaking process that took for ever),
What do you thnk?
What do you thnk?
#6
Senior Member
Thread Starter
Join Date: Feb 2004
Location: wisconsin dells ,
WI
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
RE: VIDEO OF FIRST BUILD/ A SCRATCH BUILD AT THAT
[youtube]http://www.youtube.com/watch?v=93M4lHyGWcw[/youtube]
and herse some video of it,
and herse some video of it,