Community
Search
Notices
Batteries & Chargers Nicads, Nickel Metal Hydride, Lithium, LiPoly, Chargers, Cyclers, etc...

Help Charging Li-Po

Thread Tools
 
Search this Thread
 
Old 05-20-2010, 12:10 PM
  #1  
noobdad
Junior Member
Thread Starter
 
Join Date: Dec 2009
Location: , CA
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Help Charging Li-Po

OK - this may seem elementary - but I am having some dificulty.

My son has this charger - http://www.hobbyking.com/hobbyking/s...idProduct=7028 and this battery - http://www.hobbyking.com/hobbyking/s...dProduct=10285

I plugged in the charger and there are a lot of options that I am not sure about. Is there anyway that someone can let me know what I need to do in order to get this battery charged? Thanks in advance.
Old 05-20-2010, 01:51 PM
  #2  
JDenyer232
Member
 
Join Date: Mar 2010
Location: , ME
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Help Charging Li-Po


ORIGINAL: noobdad

OK - this may seem elementary - but I am having some dificulty.

My son has this charger - http://www.hobbyking.com/hobbyking/s...idProduct=7028 and this battery - http://www.hobbyking.com/hobbyking/s...dProduct=10285

I plugged in the charger and there are a lot of options that I am not sure about. Is there anyway that someone can let me know what I need to do in order to get this battery charged? Thanks in advance.
I believe this charger is 5 amps max output and your battery is 5800mah. Charge it on the lipo balance setting with the balance lead plugged into the charger. Charge at 5.8 amps max if your charger is capable of more than 5 amps, otherwise just charge at 5 amps. Read the warning sheet that came with the battery and charger, lipos are more dangerous than other battery types if they are not charged correctly. I usually balance charge my lipos every 3rd or 4th charge, although you can balance them every charge if you like. If you don't balance every charge then measure the individual cell voltages to make sure they are balanced. Never charge any lipo cell to greater than 4.2volts per cell, nor discharge it lower than 3.0 volts per cell under load, your esc needs a low voltage cutoff to safely use lipos. Most lipo fires occur during charging, never charge unattended, and always charge in a lipo sack or other non flammable enclosure. Inspect the battery after charge and discharge and make sure the pack is not bulged, ie puffed. Never charge or use a puffed battery. Ifyou are not going to be using yourLipo for more than a few days use theLipo storage function of youcharger,it will bring it to about50% charged andbalanceit at the same time provided your balance leads are pluggedin when in storagemode.Lipo storage helps to prolong the life ofthe battery and keep the battery safeduring storage.Lipos are more volatile than other battery types, but even NIMH batteries can explode if used improperly. Lipos can be used safely provided you follow the rules for safe use. Read the instructions carefully, and if there is something you don't understand then post your question here and I'm sure someone can help you out. Hope this helps.
Old 05-20-2010, 02:17 PM
  #3  
plane-addict
Senior Member
 
Join Date: May 2010
Location: Amersfoort, , NETHERLANDS
Posts: 274
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Help Charging Li-Po

Your link to the charger didn't work for me, this is a correct one:
http://www.hobbyking.com/hobbyking/s...idProduct=7028

If you go to that specific page and find the purple tab (just below the price) you will find all kinds of files that you can download. One of them is the manual. Download it and you can learn about all the functions of the charger.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.