starting?
#1
Junior Member
Thread Starter
Join Date: May 2010
Location: chattanooga, TN
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
starting?
hi im new to rc ... kinda. iv been building radio shack eletric cars for along time but bought a nitro.
im trying to get it started. sometimes it will fire and stay idleing for a second but then it dies. if i pull it agian it wolnt work even if i dont touch the screws
what to i do!
im trying to get it started. sometimes it will fire and stay idleing for a second but then it dies. if i pull it agian it wolnt work even if i dont touch the screws
what to i do!
#2
Senior Member
RE: starting?
Hey redneck... First off welcome to the addiction.... i mean nitro rc Check out redcats web site for a crap load of videos to help you get the truck running and staying running. Alishamo does some great videos, if you can get past his quirkeness
#5
Senior Member
Join Date: Mar 2009
Location: Needville, TX
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
RE: starting?
Check the glow plug and the carb settings. Make sure you have fuel in the lines. Make very sure that the glow plug igniter is well charged. The manual I have for mine was wrong on the HSN and LSN. I'm not sure what you have so I can't tell you if it is the same or not. Check the trim on the radio also. Good luck!
#7
Senior Member
RE: starting?
Make sure the engine is primed, take the fuel line off of the muffler and blow into it till you see fuel flow into the carb...then turn your throtle trim up till you see the carb oppen a little. good luck...
#8
Member
Join Date: May 2009
Location: Phoenix, AZ
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
RE: starting?
whitecoller- If you would like please give us a call at 602-454-6445 and ask for Derek our technician, he can try to help you get the vehicle running, please have the vehicle with you when you call.