Need fuel dots for 3/16 ID Tygon - any suggestions?
#3
My Feedback: (49)
Join Date: Apr 2002
Location: SANTA ANA, CA
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need fuel dots for 3/16 ID Tygon - any suggestions?
ORIGINAL: marc s
I'm looking for some simple, neat fuel dots for 3/16 ID tygon, does anyone have suggestions?
marcs
I'm looking for some simple, neat fuel dots for 3/16 ID tygon, does anyone have suggestions?
marcs
They're used mostly by the guys flying 40% gas IMAC type aircraft. A local DA or 3W engine shop should carry something that fits.
David S
#4
Senior Member
My Feedback: (4)
Join Date: Sep 2005
Location: Vernon,
NJ
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need fuel dots for 3/16 ID Tygon - any suggestions?
Todd has them http://dreamworksrc.com/catalog/prod...roducts_id=938
or if you want to get fancy colors they have 2 different sizes regular and big http://www.pspmfg.com/FuelDots.html
or if you want to get fancy colors they have 2 different sizes regular and big http://www.pspmfg.com/FuelDots.html
#6
Thread Starter
Join Date: Jan 2007
Location: farnborough, , UNITED KINGDOM
Posts: 3,294
Likes: 0
Received 1 Like
on
1 Post
RE: Need fuel dots for 3/16 ID Tygon - any suggestions?
Greg, yes remember these, I think the fact that the fillers are already under the vent cover panels means fillers with built in covers like these have might make the access a little more fiddly. I will check but there might also be an issue with the large bore tygon fitting the fuel fill one, as I think they are made for the next size down.
marcs
marcs
#7
My Feedback: (39)
RE: Need fuel dots for 3/16 ID Tygon - any suggestions?
These are really nice - but say DA on them.
http://www.desertaircraft.com/page.php?Page=FuelDot
There are some nice looking ones on this page:
http://www.troybuiltmodels.com/cgi-b...searchstart=32
Hangar also makes a basic one.
PaulD
http://www.desertaircraft.com/page.php?Page=FuelDot
There are some nice looking ones on this page:
http://www.troybuiltmodels.com/cgi-b...searchstart=32
Hangar also makes a basic one.
PaulD
#8
RE: Need fuel dots for 3/16 ID Tygon - any suggestions?
Marc
HAN 115 should work. Or Sullivan make some that are large...we probably have them...and lots of HAN 115
Dave
HAN 115 should work. Or Sullivan make some that are large...we probably have them...and lots of HAN 115
Dave