Dynam electric motor only chatters
#1
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Loudon,
TN
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Dynam electric motor only chatters
Just completed a built of the Dynam Spitfire (1200mm). All control sufaces work fine, however, giving throttle only results in the engine chattering back and forth. Any ideas? Just a bad ESC? Any testing recommendations?
#2
Member
Join Date: Feb 2012
Location: springhill, FL
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dynam electric motor only chatters
hi, I had the same problem while building a concorde twin, when I soldered my connections, appaarentely had a bad connection on one motor, did exactly what yours is doing, just chattered back and forth, check your connections carefully, I think you'll find a bad one somewhere, after I made a good connection, motor ran perfectly, hope this helped, like seeing success and happy flying
#3
Junior Member
Thread Starter
Join Date: Apr 2013
Location: Loudon,
TN
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dynam electric motor only chatters
Thanksfor the guidance. I did remove the engine and found that one of the wires from the ESC was indeed disconnected. I reconnected it and everything works great. Thanks.