Foamies I have made lately.
12-26-2004, 12:24 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Omaha,
NE
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Foamies I have made lately.
I recently got into electric flight a few months ago.
Here are a few foamies I have made.
#1 VTO plans from 3dfoamy.com
Himaxx 2015/4166, 12X6 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 4ch. Pico Rx, and three 9g servos
#2 CAP something I call it. My own design 30" WS 33" long
GWS 350C D, 10X4.7 GWS SF prop, CC Pixie 20 ESC, E-tech 450 mAh 3S1P, GWS 4 ch. Pico Rx, and four 9g servos
#3 48" WS 48" length Pattern style of my own design
Still deciding on set up.
#4 Pitts Bipe plans from 3dbatix.com (no photos of this 1 just a video)
Himaxx 2015/4166, 11X4.7 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 6ch. Pico Rx, and Four 9g servos
Here are a few foamies I have made.
#1 VTO plans from 3dfoamy.com
Himaxx 2015/4166, 12X6 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 4ch. Pico Rx, and three 9g servos
#2 CAP something I call it. My own design 30" WS 33" long
GWS 350C D, 10X4.7 GWS SF prop, CC Pixie 20 ESC, E-tech 450 mAh 3S1P, GWS 4 ch. Pico Rx, and four 9g servos
#3 48" WS 48" length Pattern style of my own design
Still deciding on set up.
#4 Pitts Bipe plans from 3dbatix.com (no photos of this 1 just a video)
Himaxx 2015/4166, 11X4.7 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 6ch. Pico Rx, and Four 9g servos
12-26-2004, 12:30 AM
#2
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Omaha,
NE
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
RE: Foamies I have made lately.
Cap Something
#2 CAP something I call it. My own design 30" WS 33" long
GWS 350C D, 10X4.7 GWS SF prop, CC Pixie 20 ESC, E-tech 450 mAh 3S1P, GWS 4 ch. Pico Rx, and four 9g servos
#2 CAP something I call it. My own design 30" WS 33" long
GWS 350C D, 10X4.7 GWS SF prop, CC Pixie 20 ESC, E-tech 450 mAh 3S1P, GWS 4 ch. Pico Rx, and four 9g servos
12-26-2004, 12:37 AM
#4
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Omaha,
NE
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
RE: Foamies I have made lately.
#4 Pitts Bipe plans from 3dbatix.com (no photos of this 1 just a video)
Himaxx 2015/4166, 11X4.7 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 6ch. Pico Rx, and Four 9g servos
Quicker is flying the Pitts in the video, recorded by grumpE
Video can be found here on post #4 [link=http://www.rcgroups.com/forums/showpost.php?p=3068623&postcount=4]Videos Small and Large[/link]
Himaxx 2015/4166, 11X4.7 GWS SF prop, CC Phoenix 25 ESC, E-tech 1200 mAh 3S1P, GWS 6ch. Pico Rx, and Four 9g servos
Quicker is flying the Pitts in the video, recorded by grumpE
Video can be found here on post #4 [link=http://www.rcgroups.com/forums/showpost.php?p=3068623&postcount=4]Videos Small and Large[/link]
01-16-2005, 10:07 AM
#8
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Omaha,
NE
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
RE: Foamies I have made lately.
X_Vyceroy_X,
Very, very, niiiiice! Those look like balsa models with covering. How do you form the bluecor (heat it)? Thanks for sharing.
Very, very, niiiiice! Those look like balsa models with covering. How do you form the bluecor (heat it)? Thanks for sharing.
01-16-2005, 10:37 PM
#9
Junior Member
Join Date: Jan 2005
Location: , NC
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
RE: Foamies I have made lately.
Omaha .. just bend the foam .. i get a slight curve in the foam by running it across the round udge of my counter .. then lots of tape and a little foam safe CA .. then probond polyurethane glue mixed with water on the joints to secure them .. i have several how to videos at this link [link=http://www.foamfly.com/gallery/album30]Corsair Build videos[/link] it shows how i form the foam ..
Thanks for the compliments i appreciate it .. heres a pic of my current project .. i kinda got side tracked on the P-47
Thanks for the compliments i appreciate it .. heres a pic of my current project .. i kinda got side tracked on the P-47
