zagi build question
04-16-2006, 03:09 PM
#1
Member
Thread Starter
Join Date: Dec 2003
Location: Belleville,
IL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
zagi build question
easy one,
I'm building a Zagi 60, my first wing.
The CF spars are only 48" so they don't run the entire length of the wing. Should I install them
1. flush with the wing tip
2. flush with the center (root?)
3. centered between wingtip and center
I'm thinking option 1 given the center support from the plywood brace
Thanks.
I'm building a Zagi 60, my first wing.
The CF spars are only 48" so they don't run the entire length of the wing. Should I install them
1. flush with the wing tip
2. flush with the center (root?)
3. centered between wingtip and center
I'm thinking option 1 given the center support from the plywood brace
Thanks.
04-16-2006, 05:57 PM
#3
Member
Join Date: Dec 2005
Location: Bryan,
TX
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
RE: zagi build question
04-18-2006, 01:51 PM
#4
Senior Member
Join Date: Jan 2004
Location: Oak Park,
CA
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
RE: zagi build question
run it from the wing tip. If you don't run it from the wing tips, and instead run it from the center of the zagi, the ends of the plane will start warping. Big mistake I made on one of my zagi builds, had to tear it apart and respar it from the tips.
