brushless slinger setup
09-15-2005, 09:05 PM
#1
Junior Member
Thread Starter
My Feedback: (3)
Join Date: Nov 2004
Location: , TX
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
brushless slinger setup
What do you guys think about this setup for a great planes slinger? I'm trying to find a really cheap brushless setup that increases performance at least by 30% against the stock.
ALIGN 400L BRUSHLESS MOTOR (2800 KV) W/COOLING RADIATOR
http://www.allerc.com/product_info.p...oducts_id=1730
ALIGN 400L BRUSHLESS MOTOR (2800 KV) W/COOLING RADIATOR
http://www.allerc.com/product_info.p...oducts_id=1730
02-06-2006, 11:32 PM
#2
Junior Member
Join Date: Jan 2006
Location: , FL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: brushless slinger setup
I run a Multiplex 480-6d brushless w/ TP 1320 Lipo 3-cell on my Slinger (motor cost only $60 from my local dealer). The 6-d version draws only 21 amps (max) w/ an APC 6x5.5 prop!
My Slinger is flying at 80-90mph and I am outruning all of the glow powered planes that I've
raced. This combo can run even faster w/ more prop and a bigger Lipo. 25amp castle speed
control works very well.
My Slinger is flying at 80-90mph and I am outruning all of the glow powered planes that I've
raced. This combo can run even faster w/ more prop and a bigger Lipo. 25amp castle speed
control works very well.
