WHat do you recomend?
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Flatwoods, KY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
WHat do you recomend?
Just finished up 550 Hex copter with the Vector controller and want to install a FPV system in it.
Should I install separate components TX, RX, video monitor etc. or is it better to start out with a complete system, like the Fat Shark Attitude, that is more plug and play?
I will be flying only to the limits of my transmitter (DSMX) so extreme range is not a factor.
I might want to upgrade later with a ground station and better antennas but don't have any further upgrades is mind.
Thanks for the inputs.
Mike
PS
Posted this on aerial photo and video thread of this site and got no reply so here might be a better place to post it.
Thanks for your help as I am going to try and order a system by this Sunday.
Should I install separate components TX, RX, video monitor etc. or is it better to start out with a complete system, like the Fat Shark Attitude, that is more plug and play?
I will be flying only to the limits of my transmitter (DSMX) so extreme range is not a factor.
I might want to upgrade later with a ground station and better antennas but don't have any further upgrades is mind.
Thanks for the inputs.
Mike
PS
Posted this on aerial photo and video thread of this site and got no reply so here might be a better place to post it.
Thanks for your help as I am going to try and order a system by this Sunday.