Eagle Tree Vector - Trouble Selecting Aircraft Model Type
#1
Member
Thread Starter
Join Date: Apr 2009
Location: Altamonte Springs,
FL
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Eagle Tree Vector - Trouble Selecting Aircraft Model Type
I have everything wired up for a traditional aircraft model but I cannot get passed the selection of traditional aircraft in the model type selection menu.
I have not fully installed the components in the model until I see everything is working, does it have to be level for the aircraft type to be selected??
On the PC software the "Apply" button is greyed out when "traditional" selected and on the OSD menu I can select 'traditional' but I cannot select and make the message go away.
Here is clip: https://www.youtube.com/watch?v=as0Ayoo4IhU
Any help would be appreciated.
Dave
I have not fully installed the components in the model until I see everything is working, does it have to be level for the aircraft type to be selected??
On the PC software the "Apply" button is greyed out when "traditional" selected and on the OSD menu I can select 'traditional' but I cannot select and make the message go away.
Here is clip: https://www.youtube.com/watch?v=as0Ayoo4IhU
Any help would be appreciated.
Dave