Fat Shark Goggle with Pan and Tilt
#1
Thread Starter
Join Date: May 2005
Location: Anglesey, North Wales
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Fat Shark Goggle with Pan and Tilt
Hello,
I hope someone out there can help please.
I have fitted the Fat Shark Trinity Head Tracker module to my googles. They have been set to operate on channels 5 and 6.
I have connected the goggles to my Futaba 12Z with channels 5 and 6 set to operate with the trainer switch in trainer mode with the supplied trainer cord..
Nothing happens.
I have tried every permutation I can think of.
One point my TX showed a power level of 42% but when I disconnected the battery from the goggles whilst connected to the TX the Power level on the TX dropped to 18% meaning that the TX was drawing power from the goggles.
Can any one help or describe in detail how the 12Z should be set up.
Thank you
I hope someone out there can help please.
I have fitted the Fat Shark Trinity Head Tracker module to my googles. They have been set to operate on channels 5 and 6.
I have connected the goggles to my Futaba 12Z with channels 5 and 6 set to operate with the trainer switch in trainer mode with the supplied trainer cord..
Nothing happens.
I have tried every permutation I can think of.
One point my TX showed a power level of 42% but when I disconnected the battery from the goggles whilst connected to the TX the Power level on the TX dropped to 18% meaning that the TX was drawing power from the goggles.
Can any one help or describe in detail how the 12Z should be set up.
Thank you