CNC FPV BGC 2 Axis Brushless Gimbal w/Controller
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
CNC FPV BGC 2 Axis Brushless Gimbal w/Controller
Hi all,
I bought in eBay a [h=2]CNC FPV BGC 2 Axis Brushless Gimbal w/Controller[/h]When I connected it to power for the first time, it reseted properly, even though the camera was tilted and could not be repositioned properly. I tried to position it properly by pressing the button on the controller but it didn't work. Then I continued to install it on the S500 quad. I completed it according to the instructions and it was still tillting to one side. Then I connected it to the software and things got worse. Before I used to have the Red ad Green light blinking now it is just a solid red. Even worse, now the USB does not work, Win10 does not recognise it.
I thought it could be the controller, so I bought another one, I am still waiting .... Any ideas? Am I doing something wrong?
Thank you
I bought in eBay a [h=2]CNC FPV BGC 2 Axis Brushless Gimbal w/Controller[/h]When I connected it to power for the first time, it reseted properly, even though the camera was tilted and could not be repositioned properly. I tried to position it properly by pressing the button on the controller but it didn't work. Then I continued to install it on the S500 quad. I completed it according to the instructions and it was still tillting to one side. Then I connected it to the software and things got worse. Before I used to have the Red ad Green light blinking now it is just a solid red. Even worse, now the USB does not work, Win10 does not recognise it.
I thought it could be the controller, so I bought another one, I am still waiting .... Any ideas? Am I doing something wrong?
Thank you