98" MQ-9 Reaper FPV
5 Attachment(s)
Almost RTF... just awaiting a custom 3D printed camera ball/gimble to replace the current one.
-ImmersionRC 5.8 vTx -EZOSD -PRO700 WDR CCD Camera -Fatshark Attitude goggles w/ Head Tracking -E-Flite Retracts -Rimfire 46 motor -Castle Talon 90 ESC -Flightpower 5000mah 50C 4cell battery -3-Axis Gyro -And a lot of hope this baby will fly! http://www.rcuniverse.com/forum/atta...mentid=1951776 http://www.rcuniverse.com/forum/atta...mentid=1951777 http://www.rcuniverse.com/forum/atta...mentid=1951778 http://www.rcuniverse.com/forum/atta...mentid=1951779 http://www.rcuniverse.com/forum/atta...mentid=1951780 Build thread... http://fpvlab.com/forums/showthread....e-2500mm/page7 |
Amazing, what was the overall cost on your FPV system? How far do you think you can go with this system.
|
Originally Posted by bRandom
(Post 11694383)
Almost RTF... just awaiting a custom 3D printed camera ball/gimble to replace the current one.
-ImmersionRC 5.8 vTx -EZOSD -PRO700 WDR CCD Camera -Fatshark Attitude goggles w/ Head Tracking -E-Flite Retracts -Rimfire 46 motor -Castle Talon 90 ESC -Flightpower 5000mah 50C 4cell battery -3-Axis Gyro -And a lot of hope this baby will fly! http://www.rcuniverse.com/forum/atta...mentid=1951776 http://www.rcuniverse.com/forum/atta...mentid=1951777 http://www.rcuniverse.com/forum/atta...mentid=1951778 http://www.rcuniverse.com/forum/atta...mentid=1951779 http://www.rcuniverse.com/forum/atta...mentid=1951780 Build thread... http://fpvlab.com/forums/showthread....e-2500mm/page7 How is it coming along? What kind of flight times are you expecting? Are you planning autonomous flight? I am a DJI phantom guy but with a long RC plans and jet background now wanting to get into longer range uav plane flight. Any idea, vendors, etc acceptable. Mid to high price range ok. |
All times are GMT -8. The time now is 01:14 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.