98" MQ-9 Reaper FPV
#1
Thread Starter
98" MQ-9 Reaper FPV
Almost RTF... just awaiting a custom 3D printed camera ball/gimble to replace the current one.
-ImmersionRC 5.8 vTx
-EZOSD
-PRO700 WDR CCD Camera
-Fatshark Attitude goggles w/ Head Tracking
-E-Flite Retracts
-Rimfire 46 motor
-Castle Talon 90 ESC
-Flightpower 5000mah 50C 4cell battery
-3-Axis Gyro
-And a lot of hope this baby will fly!
Build thread...
http://fpvlab.com/forums/showthread....e-2500mm/page7
-ImmersionRC 5.8 vTx
-EZOSD
-PRO700 WDR CCD Camera
-Fatshark Attitude goggles w/ Head Tracking
-E-Flite Retracts
-Rimfire 46 motor
-Castle Talon 90 ESC
-Flightpower 5000mah 50C 4cell battery
-3-Axis Gyro
-And a lot of hope this baby will fly!
Build thread...
http://fpvlab.com/forums/showthread....e-2500mm/page7
#3
Junior Member
Join Date: Jan 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Almost RTF... just awaiting a custom 3D printed camera ball/gimble to replace the current one.
-ImmersionRC 5.8 vTx
-EZOSD
-PRO700 WDR CCD Camera
-Fatshark Attitude goggles w/ Head Tracking
-E-Flite Retracts
-Rimfire 46 motor
-Castle Talon 90 ESC
-Flightpower 5000mah 50C 4cell battery
-3-Axis Gyro
-And a lot of hope this baby will fly!
Build thread...
http://fpvlab.com/forums/showthread....e-2500mm/page7
-ImmersionRC 5.8 vTx
-EZOSD
-PRO700 WDR CCD Camera
-Fatshark Attitude goggles w/ Head Tracking
-E-Flite Retracts
-Rimfire 46 motor
-Castle Talon 90 ESC
-Flightpower 5000mah 50C 4cell battery
-3-Axis Gyro
-And a lot of hope this baby will fly!
Build thread...
http://fpvlab.com/forums/showthread....e-2500mm/page7
How is it coming along? What kind of flight times are you expecting? Are you planning autonomous flight? I am a DJI phantom guy but with a long RC plans and jet background now wanting to get into longer range uav plane flight. Any idea, vendors, etc acceptable. Mid to high price range ok.