14MZ LST and LS
#1
Thread Starter
Join Date: Jul 2011
Location: Newport Beach, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
14MZ LST and LS
Is it possible to change the percentage amount per click using the LS and LST, lets say 1 click equal 8%, can that be changed to 2% if so can you let me know were that can be set/changed as I can't find it?
Thanks,
Steve
Thanks,
Steve
#2
My Feedback: (11)
RE: 14MZ LST and LS
The amount of movement of the two sliders, LS and LST, is determined in the endpoint section of the Linkage Menu. If you set the travel percentage to a lower number, then you get more movement per click, but you also get less total movement. You can only set the total range a servo moves from end-to-end. The clicks are mechanical in the transmitter and really have no bearing on how the servo moves. They are not set to any kind of percentage.